Painted McFarlane Aquaman head - McFarlane

Painted McFarlane Aquaman head - McFarlane

***PLEASE NOTE***

Action figure scales vary widely. We try to hit the Classified 1/12 and the McF/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase. Thank you.

****READ ABOVE****

(1) painted Aquaman head designed for McFarlane Bodies

sculpted by JCirion3d

Painted by @onepercase

Each head will have minor paint differences.

printed in Resione M70/TH72 mix

Heads will need to be fitted for the figure you choose. The socket is designed for Mythic Legions 2.0 bodies and will require a tiny bity of sticky tack.

You may need the following instructions:

You can get away with sticky tack on the ball peg but a more permanent solution is best. A new technique going around in the action figure communities is using a tiny piece or "rubber" tubing over the existing ball joint to enlarge it. I use the method described below.

I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.

All items are 3D printed and some are coated with a primer and/or printed in different colors. There can be differences and imperfections in each piece. We strive to make quality items that do not break easily, but these items can be more fragile than manufactured items and susceptible to extreme temperatures due to the material. 3D printed items are susceptible to UV light and should be protected from sunlight until finished with clear coat/paint. Thank you so much for considering a purchase!