Mictlantecuhtli, "God of the Dead" of Aztec Mythology head - Mythic legions 1.0

Mictlantecuhtli, "God of the Dead" of Aztec Mythology - Mythic legions 1.0 scale 

Two parts: Head printed in transparent resin and headdress in teal transparent

Designed by Old Skull Customs

Mictlantecuhtli is the Aztec god of the dead and lord of Mictlan, the deepest level of the Aztec underworld. He is often depicted as a skeletal figure with bloodied jaws and wearing bones, owls, or skulls as ornaments. Cold, stern, and powerful, Mictlantecuhtli ruled alongside his wife Mictecacihuatl, and together they governed the souls of those who died natural deaths.

As the master of death, Mictlantecuhtli was both feared and respected—he represented the inevitable end all must face and the divine order of the afterlife. His image was central in rituals involving death, the afterlife, and ancestor reverence.

NO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS

Disclaimers and Instructions:

This item is a 3d printed item for adults.  This is not intended for children.

Unpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.

All items are made and/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.

If you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.

All heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.

Thank you so much for considering a purchase!

All hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!

***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1/18, Classified 1/12 and the McF/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.

Thank you!