Crimson AND Python Patrol BAT attachments (gatling, sickle, sword, m249) - 1/12 scale BAT Attachment

Crimson AND Python Patrol BAT attachments (gatling, sickle, sword, m249) - 1/12 scale BAT Attachment

3d printed 1/12 scale Crimson/Python Patrol BAT Attachments from the following selections:

Crimson M249 - Black Port

Crimson Sword - Black Port

Crimson Sickle - Black Port

Crimson Mini Gatling Gun (Quantity 2) - Black Port

All items are 3D printed and some are coated with a primer and/or printed in different colors. There can be differences and imperfections in each piece. We strive to make quality items that do not break easily, but these items can be more fragile than manufactured items and susceptible to extreme temperatures due to the material. 3D printed items are susceptible to UV light and should be protected from sunlight until finished with clear coat/paint. Thank you so much for considering a purchase!

FYI: It seems that there are 2 different sized BAT wrist holes found. 12591 seems to be a slightly larger size. You can find the code on the bottom of the left foot. 12661 and higher seem to be the same size and that is what the peg hole is sized for. 12661 fits but there is a little wobble.

NO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS

Disclaimers and Instructions:

This item is a 3d printed item for adults. This is not intended for children.

Unpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.

All items are made and/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.

If you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.

All heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.

Thank you so much for considering a purchase!

All hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!

***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1/18, Classified 1/12 and the McF/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.

Thank you!