{"title":"Old Skull Customs","description":"","products":[{"product_id":"auralyn-female-elf-head-mythic-legions-2-0-bodies","title":"Auralyn, Female Elf head - Mythic legions 2.0","description":"\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eAuralyn, Female Elf head - Mythic Legions 2.0 scale \u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813270290572,"sku":"P","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/45fb5aba-il_fullxfull.6562364392_6ehj.jpg?v=1738686885"},{"product_id":"amekai-the-kappa-mythic-legions-1-0-and-1-10-scale-figures","title":"Amekai the Kappa - Mythic Legions 1.0 scale","description":"\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eAmekai the Kappa Head - Mythic Legions 1.0 scale \u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813289820300,"sku":"NH","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/kappa.jpg?v=1763822974"},{"product_id":"mummy-head-mythic-legions-1-0-and-1-10-scale-figures","title":"Akharis, mummy - Mythic Legions 1.0","description":"\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eAkharis, mummy head - Mythic Legions 1.0 scale \u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking. Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813290639500,"sku":"ND","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/Mummy_dry_socket.jpg?v=1763822959"},{"product_id":"bubbloo-the-bubble-maker-sea-monkey-head-mythic-legions-1-0-and-1-10-scale-figures-2","title":"Bubbloo the Bubble Maker, Sea Monkey head - Mythic Legions 1.0","description":"\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eBubbloo the Bubble Maker, Sea Monkey head - Mythic Legions 1.0 scale \u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking. Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813870895244,"sku":"MS","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/Sea_Monkey.jpg?v=1763822916"},{"product_id":"tshiro-elf-ponytail-head-mythic-legions-2-0-bodies-3","title":"T'Shiro Elf Ponytail head - Mythic legions 2.0","description":"\u003cp\u003e\u003cb\u003eT'Shiro Elf Ponytail head - Mythic legions 2.0\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43815001161868,"sku":"NJ","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/cb8e6c9e-il_fullxfull.6610486229_9u88.jpg?v=1738721427"},{"product_id":"tshiro-elf-ponytail-head-mythic-legions-1-0-bodies-3","title":"T'Shiro Elf Ponytail head - Mythic legions 1.0","description":"\u003cp\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43815001194636,"sku":"NI","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/812b4fb4-il_fullxfull.6562359826_9af6.jpg?v=1738721427"},{"product_id":"brinejaw-the-forlorn-diver-head-mythic-legions-1-0-and-1-10-scale-figures-2","title":"Brinejaw the Forlorn, diver head - Mythic Legions 1.0","description":"\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eBrinejaw the Forlorn, diver head - Mythic Legions 1.0 scale \u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking. Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43815001391244,"sku":"JI","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/Skull_Diver.jpg?v=1763822901"},{"product_id":"fenn-quillback-hedgehog-head-and-spikes-mythic-legions-1-3","title":"Fenn Quillback Hedgehog head and Spikes - Mythic legions 1.0","description":"\u003cp class=\"MsoNormal\"\u003e\u003ca name=\"_Hlk195797524\"\u003e\u003c\/a\u003e\u003cb\u003eFenn Quillback Hedgehog head and Spikes - Mythic legions 1.0\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking. Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThank you so much for considering a purchase! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThank you\u003c\/span\u003e!\u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43815002931340,"sku":"ZA","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/eda3a02f-il_fullxfull.6538839721_pjmn.jpg?v=1738721428"},{"product_id":"caeloth-warden-of-the-hidden-pools-axolotl-head-mythic-legions-ogre-scale","title":"Caeloth, Warden of the Hidden Pools, Axolotl head - Mythic Legions Ogre scale","description":"\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eCaeloth, Warden of the Hidden Pools, Axolotl head - Mythic Legions Ogre scale \u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking. Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":44047745843340,"sku":"JJ","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/Axolotl_78207a71-d14c-4f4a-af05-e5f08e721736.jpg?v=1763822844"},{"product_id":"kitty-female-elf-head-mythic-legions-2-0-bodies","title":"Kitty, Female Elf head - Mythic legions 2.0","description":"\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eKitty, Female Elf head - Mythic Legions 2.0 scale \u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Mythic Legions 2.0","offer_id":46559063376012,"sku":null,"price":11.99,"currency_code":"USD","in_stock":true},{"title":"1:12 scale","offer_id":46559063408780,"sku":null,"price":11.99,"currency_code":"USD","in_stock":true},{"title":"1:10 scale","offer_id":46559063441548,"sku":null,"price":11.99,"currency_code":"USD","in_stock":true},{"title":"1:18 scale","offer_id":46559063474316,"sku":null,"price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/KittyElf.png?v=1773086368"},{"product_id":"axolotl-character-kits-mythic-legions-2-0-bodies","title":"Axolotl Character Kit - Mythic legions 2.0 bodies","description":"\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eAxolotl Character Kits - Mythic Legions 2.0 scale \u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eEach kit will have at least minor differences.  There are 3 major color variants for the heads, 3 variants to the pauldrons, and multiple color variants for the sword \"blade\" and hilt.  These are like a blind bag offering however feel free to request.  Worst answer is that I don't have those variants any more.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eThe head is translucent with a color gradient.  Blues and purples.  The pics display the different effects from back lighting and different angles.  Certain angles will reflect a metallic sheen and others will allow light to pass through.  It is a fun technique.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eIncludes Painted head, pauldrons, and weapons\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eHead and Coral Sword designs by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":44126813225100,"sku":"CK-A","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/8F20EA23-8181-4D25-9625-C14537350DD0.jpg?v=1747703633"},{"product_id":"zombie-bear-character-kit-mythic-legions-1-0-bodies","title":"Zombie Bear Character Kit - Mythic legions 1.0","description":"\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eZombie Bear Character Kit - Mythic Legions 1.0 scale \u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eEach kit will have minor differences.  \u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eIncludes Painted head, pauldrons, and weapons\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eHead design by Old Skull Customs\u003cbr\u003eArm weapons by Rogue Printing Machine\u003cbr\u003ePauldrons by Action Figure Fusion\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":44126819713164,"sku":"CK-ZB","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/IMG_4714.jpg?v=1747711160"},{"product_id":"head-mythic-legions-2-0-bodies","title":"Inguma head from Basque mythology - Mythic legions 2.0","description":"\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eInguma head - Mythic Legions 2.0 scale \u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":44144597991564,"sku":"PE","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/Inguma.jpg?v=1763822808"},{"product_id":"head-from-basque-mythology-mythic-legions-2-0-bodies","title":"Tartalo head from Basque mythology - Mythic legions 1.0 bodies","description":"\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eTartalo head - Mythic Legions 2.0 scale \u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":44144715432076,"sku":"PE","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/Tartalo2.jpg?v=1763822795"},{"product_id":"punk-inguma-head-from-basque-mythology-mythic-legions-1-0-bodies","title":"Punk Inguma head from Basque mythology - Mythic legions 1.0 bodies","description":"\u003cp class=\"MsoNormal\"\u003e\u003cb\u003ePunk Inguma head - Mythic Legions 1.0 scale \u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":44144764878988,"sku":"PF","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/Spiked_Inguma.jpg?v=1763822758"},{"product_id":"zombie-head-mythic-legions-1-0-bodies","title":"Sloppy Brain the Zombie head - Mythic legions 1.0 bodies","description":"\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eZombie head - Mythic Legions 1.0 scale \u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":44144829595788,"sku":"PF","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/Zombie.jpg?v=1763822741"},{"product_id":"feathered-tlaloc-head-aztec-mythology-mythic-legions-1-0-bodies","title":"Feathered Tlaloc head Aztec Mythology - Mythic legions 1.0","description":"\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eFeathered Tlaloc head - Mythic Legions 1.0 scale \u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e\"Tlaloc is the Aztec god of rain, water, and fertility. He controls storms and nourishes the earth but can also unleash floods and lightning when angered. Often depicted with goggle eyes and fangs, he rules over the paradise of Tlalocan.\"\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":44144865673356,"sku":"PF","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/Feathered_Tlaloc1.jpg?v=1763822722"},{"product_id":"the-death-crowned-king-zombie-head-mythic-legions-1-0","title":"The Death Crowned King, zombie head - Mythic legions 1.0","description":"\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eThe Death Crowned King, zombie head - Mythic Legions 1.0 scale \u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003ch3 data-end=\"153\" data-start=\"121\"\u003e\n\u003cstrong data-end=\"151\" data-start=\"125\"\u003eThe Death-Crowned King aka \u003c\/strong\u003e\u003cem data-start=\"1294\" data-end=\"1343\"\u003eLord of Shards, King of Ruin, The Iron Revenant\u003c\/em\u003e\n\u003c\/h3\u003e\n\u003cp data-end=\"230\" data-start=\"154\"\u003e\u003cstrong data-end=\"185\" data-start=\"154\"\u003eTrue Name (Long Forgotten):\u003c\/strong\u003e \u003cem data-end=\"230\" data-start=\"186\"\u003eVekthar Morwyn, Last King of the Iron Vale\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e“He ruled with steel, he fell by sorcery. Now he walks with silence, and the crown still bleeds.”\u003c\/p\u003e\n\u003cp data-end=\"598\" data-start=\"232\"\u003eLong ago, the Iron Vale was a land of blackened forges and unyielding steel, where kings were not crowned with gold—but with the broken blades of those they conquered. Vekthar was its final ruler, a warlord-king who wore a crown forged from the jagged remnants of rebel swords, hammered into his very skull by his own hand to prove that no betrayal could pierce him.\u003c\/p\u003e\n\u003cp data-end=\"892\" data-start=\"600\"\u003eAs his conquests grew, so too did his cruelty. He ordered the construction of the \u003cstrong data-end=\"697\" data-start=\"682\"\u003eThrone Pyre\u003c\/strong\u003e, a cursed seat smelted with the bones of his enemies, and struck a forbidden pact with a forgotten god of decay. In exchange for eternal dominion, Vekthar offered his soul and his people’s fate.\u003c\/p\u003e\n\u003cp data-end=\"950\" data-start=\"894\"\u003eBut death did not make him a god—it made him a prisoner.\u003c\/p\u003e\n\u003cp data-end=\"1254\" data-start=\"952\"\u003eThe Iron Vale fell to ash, swallowed by time, but Vekthar remained. Bound to his shattered crown, his soul could never pass on. Now known only as \u003cstrong data-end=\"1124\" data-start=\"1098\"\u003eThe Death-Crowned King\u003c\/strong\u003e, he wanders the ruins of his empire, emaciated and wrathful, his jagged crown a symbol of a curse that cuts deeper than any blade.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-start=\"1292\" data-end=\"1345\"\u003e\n\u003cp data-start=\"1294\" data-end=\"1345\"\u003e \u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1346\" data-end=\"1445\"\u003e\n\u003cp data-start=\"1348\" data-end=\"1445\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":44144931700876,"sku":"PF","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/Death_Crowned_King.jpg?v=1763823188"},{"product_id":"camazotz-the-mayan-bat-god-mythic-legions-1-0","title":"Camazotz, the Mayan Bat God - Mythic legions 1.0","description":"\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eCamazotz, the Mayan Bat God - Mythic legions 1.0 scale \u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp data-start=\"1348\" data-end=\"1445\"\u003e\u003cbr\u003e\u003cstrong\u003eCamazotz is a bat god of death and the night from Maya mythology. With leathery wings, blood-soaked claws, and a fearsome screech, he guards the underworld and strikes from the shadows. Known for decapitating one of the Hero Twins in the Popol Vuh, he embodies darkness, sacrifice, and the terror of the unknown.\u003c\/strong\u003e\u003cstrong data-end=\"151\" data-start=\"125\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":44145026957452,"sku":"PF","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/Camazotz.jpg?v=1763823062"},{"product_id":"kubikajiri-yokai-head-mythic-legions-1-0","title":"Kubikajiri, Yokai head - Mythic legions 1.0","description":"\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eKubikajiri, Yokai head - Mythic legions 1.0 scale \u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003ch3 data-end=\"155\" data-start=\"124\"\u003e\u003cstrong data-end=\"153\" data-start=\"128\"\u003eKubikajiri-no-Takeshi\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp data-end=\"193\" data-start=\"156\"\u003e\u003cstrong data-end=\"193\" data-start=\"156\"\u003e“Takeshi, the One Who Eats Heads”\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-end=\"499\" data-start=\"195\"\u003eOnce a proud samurai of the Araragi clan, \u003cstrong data-end=\"248\" data-start=\"237\"\u003eTakeshi\u003c\/strong\u003e was betrayed during a moonless siege—ambushed by those he once called brothers. Cut down without honor and left among the forgotten dead, his soul should have passed on. But hatred festered in his bones, and something ancient stirred in the darkness.\u003c\/p\u003e\n\u003cp data-end=\"805\" data-start=\"501\"\u003eNow he walks again, a revenant fueled by vengeance and sorrow. \u003cstrong data-end=\"643\" data-start=\"564\"\u003eNo mask veils his face—only the polished white skull of the man he once was\u003c\/strong\u003e, gleaming like bone left to bleach beneath a bitter sun. His empty eye sockets seem to see deeper than the living, as if he peers straight into memory and guilt.\u003c\/p\u003e\n\u003cp data-end=\"1071\" data-start=\"807\"\u003eCursed by the hunger of the \u003cstrong data-end=\"849\" data-start=\"835\"\u003eKubikajiri\u003c\/strong\u003e, he seeks not flesh but \u003cstrong data-end=\"886\" data-start=\"874\"\u003eidentity\u003c\/strong\u003e—stealing the \u003cem data-end=\"907\" data-start=\"900\"\u003enames\u003c\/em\u003e and \u003cem data-end=\"919\" data-start=\"912\"\u003efaces\u003c\/em\u003e of those who die by his blade. His victims are buried without remembrance, their spirits severed from the world, just as his own was once denied peace.\u003c\/p\u003e\n\u003cp data-end=\"1243\" data-start=\"1073\"\u003eHis sword, \u003cstrong data-end=\"1102\" data-start=\"1084\"\u003eNamida-no-Kiba\u003c\/strong\u003e (\u003cem data-end=\"1119\" data-start=\"1104\"\u003eFang of Tears\u003c\/em\u003e), is said to weep blood when he draws near to oathbreakers and traitors. When drawn, its edge hums with the sound of the wind over graves.\u003c\/p\u003e\n\u003cp data-end=\"1444\" data-start=\"1245\"\u003eIn whispered legend, he is a hunter of the dishonorable. In truth, \u003cstrong data-end=\"1358\" data-start=\"1312\"\u003ehe is the echo of justice twisted by grief\u003c\/strong\u003e, and he will not rest until every name carved into the blade of betrayal is silenced.\u003c\/p\u003e\n\u003cp data-end=\"1157\" data-start=\"1054\"\u003eHis sword, \u003cstrong data-end=\"1083\" data-start=\"1065\"\u003eNamida-no-Kiba\u003c\/strong\u003e (\u003cem data-end=\"1100\" data-start=\"1085\"\u003eFang of Tears\u003c\/em\u003e), is said to weep blood when he draws near to a traitor.\u003c\/p\u003e\n\u003cp data-start=\"1348\" data-end=\"1445\"\u003e\u003cstrong data-end=\"151\" data-start=\"125\"\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":44145129521292,"sku":"PF","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/Samurai_Skull.jpg?v=1763822670"},{"product_id":"mictecacihuatl-lady-of-the-dead-head-of-aztec-mythology-mythic-legions-1-0","title":"Mictecacihuatl, \"Lady of the Dead\" of Aztec Mythology head - Mythic legions 1.0","description":"\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eMictecacihuatl, \"Lady of the Dead\" of Aztec Mythology - Mythic legions 1.0 scale \u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eWILL NOT BE TRANSPARENT - Printed in our current \"head\" resin\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp data-end=\"1445\" data-start=\"1348\"\u003e\u003cstrong data-start=\"128\" data-end=\"153\"\u003e\u003cstrong data-start=\"0\" data-end=\"18\" data-is-only-node=\"\"\u003eMictecacihuatl\u003c\/strong\u003e is the \u003cstrong data-start=\"26\" data-end=\"52\"\u003eAztec goddess of death\u003c\/strong\u003e, known as the \u003cem data-start=\"67\" data-end=\"85\"\u003eLady of the Dead\u003c\/em\u003e. She rules over \u003cstrong data-start=\"102\" data-end=\"113\"\u003eMictlan\u003c\/strong\u003e, the underworld, alongside her husband \u003cstrong data-start=\"153\" data-end=\"172\"\u003eMictlantecuhtli\u003c\/strong\u003e. Often depicted with a skull-like face and flayed flesh, she watches over the bones of the dead and presides over festivals honoring the deceased—roots of today’s Día de los Muertos. Her presence is both fearsome and sacred, symbolizing the cycle of death and rebirth.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Teal Headdress","offer_id":44149887926412,"sku":"PG-1","price":10.99,"currency_code":"USD","in_stock":true},{"title":"Red Headdress","offer_id":44149887959180,"sku":"PG-2","price":10.99,"currency_code":"USD","in_stock":true},{"title":"Clear Headdress","offer_id":44149887991948,"sku":"PG-3","price":10.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/Mictecacihuatl_Lady_of_the_Dead.jpg?v=1763822636"},{"product_id":"mictlantecuhtli-god-of-the-dead-of-aztec-mythology-head-mythic-legions-1-0","title":"Mictlantecuhtli, \"God of the Dead\" of Aztec Mythology head - Mythic legions 1.0","description":"\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eMictlantecuhtli, \"God of the Dead\" of Aztec Mythology - Mythic legions 1.0 scale \u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eWILL NOT BE TRANSPARENT - Printed in our current \"head\" resin\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp data-start=\"0\" data-end=\"393\"\u003e\u003cstrong\u003eMictlantecuhtli is the Aztec god of the dead and lord of Mictlan, the deepest level of the Aztec underworld. He is often depicted as a skeletal figure with bloodied jaws and wearing bones, owls, or skulls as ornaments. Cold, stern, and powerful, Mictlantecuhtli ruled alongside his wife Mictecacihuatl, and together they governed the souls of those who died natural deaths.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"395\" data-end=\"640\" data-is-last-node=\"\" data-is-only-node=\"\"\u003e\u003cstrong\u003eAs the master of death, Mictlantecuhtli was both feared and respected—he represented the inevitable end all must face and the divine order of the afterlife. His image was central in rituals involving death, the afterlife, and ancestor reverence.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":44145237229708,"sku":"PH","price":10.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/Mictlantecuhtli_God_of_the_Dead.jpg?v=1763822578"},{"product_id":"tengu-masked-head-japanese-mythology-head-mythic-legions-1-0","title":"Tengu, Masked head Japanese Mythology head - Mythic legions 1.0","description":"\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eTengu, Masked head Japanese Mythology head - Mythic legions 1.0 \u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eWith or without hanging cords.  Pics of printed head without cords.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp data-end=\"261\" data-start=\"0\"\u003eTengu are mythical creatures from Japanese folklore, often depicted as part bird, part human. They are traditionally associated with mountains and forests, and are considered both \u003cstrong data-end=\"202\" data-start=\"180\"\u003eprotective spirits\u003c\/strong\u003e and \u003cstrong data-end=\"236\" data-start=\"207\"\u003emischievous troublemakers\u003c\/strong\u003e, depending on the story.\u003c\/p\u003e\n\u003cp data-end=\"288\" data-start=\"263\"\u003eThere are two main types: \u003cstrong data-end=\"321\" data-start=\"292\"\u003eKarasu Tengu (Crow Tengu)\u003c\/strong\u003e – bird-like with beaks and wings and \u003cstrong data-end=\"378\" data-start=\"359\"\u003eYamabushi Tengu\u003c\/strong\u003e – more human-like with red faces, long noses, and dressed like mountain ascetics (yamabushi monks).\u003c\/p\u003e\n\u003cp data-end=\"703\" data-start=\"480\"\u003eTengu are skilled martial artists and are often portrayed as guardians of sacred mountains, punishing arrogance and pride. Over time, they shifted from malevolent demons to more noble or even protective figures in folklore.  \u003c\/p\u003e\n\u003cp data-end=\"703\" data-start=\"480\"\u003eThe mask: long nose signifies \u003cstrong data-start=\"1000\" data-end=\"1041\"\u003epride, power, and spiritual authority\u003c\/strong\u003e—sometimes mockingly, sometimes reverently.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"With Hanging Cords","offer_id":44974411481228,"sku":"PH-1","price":8.99,"currency_code":"USD","in_stock":true},{"title":"Without Hanging Cords","offer_id":44974411513996,"sku":"PH-2","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/Tengux2.jpg?v=1763846537"},{"product_id":"tepeyollotl-jaguar-god-of-aztec-mythology-head-mythic-legions-1-0","title":"Tepeyollotl, Jaguar God of Aztec Mythology head - Mythic legions 1.0","description":"\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eTepeyollotl, Jaguar God of Aztec Mythology head - Mythic legions 1.0 \u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp data-start=\"237\" data-end=\"661\"\u003e\u003cstrong\u003eTepeyollotl is a shadowy jaguar deity who prowls the sacred mountains, his roar echoing through the deep canyons and caves. He is the guardian of hidden places, the primal sound of the earth itself. Often depicted as a jaguar with open jaws, he embodies the wild power of nature—mysterious, untamed, and resonant. Though rarely worshipped openly, his presence is felt in rumbling earth and whispering echoes.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"663\" data-end=\"769\"\u003e\u003cstrong\u003eHe is sometimes seen as a facet of Tezcatlipoca, reflecting his subterranean and chthonic aspects.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":44147976831116,"sku":"PH","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/Werejaguar1.jpg?v=1763822530"},{"product_id":"herensuge-dragon-of-basque-mythology-mythic-legions-1-0","title":"Herensuge, Dragon of Basque Mythology - Mythic legions 1.0","description":"\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eHerensuge, Dragon of Basque Mythology - Mythic legions 1.0\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003ch3 data-start=\"12\" data-end=\"52\"\u003e🐉 \u003cstrong data-start=\"19\" data-end=\"32\"\u003eHerensuge\u003c\/strong\u003e – The Basque Dragon\u003c\/h3\u003e\n\u003cp data-start=\"54\" data-end=\"300\"\u003e\u003cstrong data-start=\"54\" data-end=\"67\"\u003eHerensuge\u003c\/strong\u003e is a mythical dragon from \u003cstrong data-start=\"94\" data-end=\"113\"\u003eBasque folklore\u003c\/strong\u003e, often portrayed as a \u003cstrong data-start=\"136\" data-end=\"173\"\u003egiant, fearsome serpent or dragon\u003c\/strong\u003e, sometimes with \u003cstrong data-start=\"190\" data-end=\"205\"\u003eseven heads\u003c\/strong\u003e. It represents \u003cstrong data-start=\"221\" data-end=\"261\"\u003echaos, destruction, and ancient evil\u003c\/strong\u003e, lurking in caves or remote mountains.\u003c\/p\u003e\n\u003cp data-start=\"332\" data-end=\"787\"\u003eHerensuge is a \u003cstrong data-start=\"347\" data-end=\"368\"\u003eserpentine dragon\u003c\/strong\u003e of immense size and cunning, coiled in the dark places of the world. Its breath scorches the land, and its many heads speak with cunning or rage. Often a terror to villages, Herensuge is the final trial of heroes or saints—only those of great courage or divine favor can hope to defeat it.\u003c\/p\u003e\n\u003cp data-start=\"789\" data-end=\"915\"\u003eHerensuge is a symbol of the \u003cstrong data-start=\"818\" data-end=\"866\"\u003euntamed forces of nature and old world fears\u003c\/strong\u003e, still lingering in the deep roots of the earth.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":44147983810700,"sku":"PH","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/Herensuge2.jpg?v=1763822937"},{"product_id":"orc-zombie-mythic-legions-1-0","title":"Orc Zombie - Mythic legions 1.0","description":"\u003cp class=\"MsoNormal\"\u003eOrc Zombie Head - Mythic legions 1.0\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":44147998523532,"sku":"PI","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/OrcZombie.jpg?v=1763820168"},{"product_id":"orc-warlord-mythic-legions-1-0","title":"Orc Warlord - Mythic legions 1.0","description":"\u003cp class=\"MsoNormal\"\u003eOrc Warlord Head - Mythic legions 1.0\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":44148011958412,"sku":"PI","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/OrcHair.jpg?v=1763820148"},{"product_id":"bald-ogre-mythic-legions-1-0","title":"Bald Ogre - Mythic Legions 1.0","description":"\u003cp class=\"MsoNormal\"\u003eBlad Ogre Head - Mythic legions 1.0\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":44148016251020,"sku":"PI","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/BaldOgre.jpg?v=1763820113"},{"product_id":"ogre-king-mythic-legions-1-0","title":"Ogre King - Mythic legions 1.0","description":"\u003cp class=\"MsoNormal\"\u003eOgre King Head - Mythic legions 1.0\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":44148036665484,"sku":"PI","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/OgreKing.jpg?v=1763820037"},{"product_id":"oni-head-mythic-legions-1-0","title":"Oni Head - Mythic legions 1.0","description":"\u003cp class=\"MsoNormal\"\u003eOni Head - Mythic legions 1.0\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":44156789981324,"sku":"PE","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/oni.jpg?v=1763822434"},{"product_id":"thornclash-the-bramblehowler-mythic-legions-1-0-and-brute-scale","title":"The Bramblehowler - Mythic legions 1.0 and Brute scale","description":"\u003cp class=\"MsoNormal\"\u003eThe Bramblehowler - Mythic legions 1.0 and Brute scale\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\"They call him the Bramblehowler. Nobody really knows what he is—part beast, part plant, twisted up by old magic that’s more curse than blessing. He’s huge, with sinewy green limbs and bark for skin, like something that clawed its way out of the deepest woods. His horns are crooked and gnarled, more like roots than bone, and his eyes gleam with the wild.\u003c\/p\u003e\n\u003cp\u003eBut he isn’t just a monster. He’s a bard. His voice is rough and low, like the wind rattling through dead trees as it reverberates through his horns, and when he plays his lyre—\u003cstrong\u003eThe Thornsong Howler\u003c\/strong\u003e—the sound cuts through the battlefield like a war cry. His music stirs more than men’s hearts. He can sing to the treants slumbering deep in the forests of Mythoss, waking them from ages-long dreams and rallying them to the call of Xylona’s Flock. When his voice rises in the old tongue, the ground itself shakes and the trees answer.\u003c\/p\u003e\n\u003cp\u003eHe’s covered in old scale armor black as obsidian, patched together with scraps from past fights, and his belt’s full of bone and feather charms from those he’s fought alongside.\u003c\/p\u003e\n\u003cp\u003eHe used to wander alone, keeping to the wild places. But when Illythia’s monsters crept into a sacred glade, He didn’t run. He stood and fought, and the Sylvan elders saw him for what he was: not just a warrior, but a bridge between the music of life and the raw magic of the forest. His songs aren’t just music—they’re spells, calling up roots to hold the line, healing the wounded, summoning the spirits of the wood, and waking the ancient treants to join the fight.\u003c\/p\u003e\n\u003cp\u003eNow, he’s the voice of Xylona’s Flock on the borderlands. His name carries weight— The Bramblehowler. When his music rises, it’s not just a song. It’s the voice of the wild itself, reminding you that nature can heal, but it can just as easily tear you apart.\u003c\/p\u003e\n\u003cp\u003e\"\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor inspiration: \u003c\/strong\u003e The Bramblehowler's armor is a blend of dark, bark-like scales, resembling hardened dragon hide, covering his shoulders and upper chest. Each scale is shaped like a jagged leaf, matte black with deep, greenish veins that shimmer faintly when light strikes them. The shoulder pauldrons are edged with jagged, obsidian-like protrusions, resembling cracked wood reinforced with ancient forest magic.\u003c\/p\u003e\n\u003cp\u003eHis leather belt and straps are weathered, stitched from\u003cstrong\u003e \u003c\/strong\u003etanned hides of forest beasts, adorned with charms made from small bones, acorns, and feathers—each a token gifted by Xylona’s spirits or fellow Flock warriors. Moss and lichen cling to his joints and crevices, hinting at his connection to the living wild.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\"The Bramblehowler’s Cry\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\"Roots below and sky above,\u003c\/em\u003e\u003cbr\u003e\u003cem\u003eWe howl the song of thorn and love,\u003c\/em\u003e\u003cbr\u003e\u003cem\u003eHear my call and rise anew,\u003c\/em\u003e\u003cbr\u003e\u003cem\u003eLet forest wrath descend on you!\u003c\/em\u003e\"*\u003c\/p\u003e\n\u003cp\u003eWhen sung in battle, this hymn:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eRouses allies\u003c\/strong\u003e with renewed vigor, granting bursts of stamina and healing.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eWeakens foes\u003c\/strong\u003e, as creeping vines claw at their feet and bind their weapons.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSummons an echoing chorus of phantom howls\u003c\/strong\u003e, confusing enemies and bolstering the courage of Xylona’s Flock.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHis deep, resonant voice carries the chant across the battlefield, blending with the crackling of branches and the rustling of unseen leaves.\u003c\/p\u003e\n\u003ch3 class=\"western\"\u003eThe Thornsong Howler\u003c\/h3\u003e\n\u003cp\u003eThe Thornsong Howler is a beast of an instrument—big, heavy, and wild-looking, just like Thornclash. It’s a massive, stringed lyre carved from the blackened heartwood of a dead treant. The wood is rough and gnarled, full of twists and knots, with veins of deep green resin that catch the light like old sap still bleeding from its core. The whole thing looks like it was ripped straight from the forest floor after a storm, bark still clinging to the edges.\u003c\/p\u003e\n\u003cp\u003eThe strings are spun from dryad-hair and forest silk, giving them a soft glow that shimmers under moonlight. They’re strong enough to hold tension for a deep, growling resonance but delicate enough for Thornclash to pull out those eerie, spine-chilling notes that make the air ripple. When he plays it, the Howler’s sound isn’t just music—it’s the language of the wild.\u003c\/p\u003e\n\u003cp\u003eThe Thornsong Howler’s body is reinforced with thick iron bands—old, rusted metal that he salvaged from battlefield wreckage and hammered into place with his own hands. Charms and totems hang from the frame: teeth from fallen beasts, bones from past battles, feathers gifted by Xylona’s flock. When he strums it, the sound can \u003cstrong\u003eshake the ground\u003c\/strong\u003e, calling up roots and brambles to entangle his enemies. His music can \u003cstrong\u003eheal wounds\u003c\/strong\u003e with the pulse of living magic or \u003cstrong\u003ewake slumbering treants\u003c\/strong\u003e, pulling them from their deep sleep to march in defense of the wilds.\u003c\/p\u003e\n\u003cp\u003eHe carries the Howler on his back when he’s not playing, strapped tight with thick leather bands. It’s not a delicate thing—it’s as much a weapon as an instrument, and he’s not afraid to swing it like a club if he needs to.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp data-end=\"2966\" data-start=\"2816\"\u003e\u003cstrong\u003eThis is fan fiction and is not associated with The Four Horsemen or Mythic Legions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":44156803809420,"sku":"PE","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/Bramblehowler.jpg?v=1763820000"},{"product_id":"undead-broken-olmec-style-1-mythic-legions-1-0","title":"Undead Broken Olmec Style 1 - Mythic legions 1.0","description":"\u003cp class=\"MsoNormal\"\u003eUndead Broken Olmec Style 1 - Mythic legions 1.0\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe Olmec were one of the earliest complex civilizations in Mesoamerica, flourishing from around 1200 to 400 BCE along the Gulf Coast of present-day Mexico. Known for their massive stone heads, intricate jade carvings, and sophisticated urban centers, they laid the cultural groundwork for later civilizations like the Maya and Aztecs. Often called the \"Mother Culture\" of Mesoamerica, the Olmec are famous for their artistry, trade networks, and early use of hieroglyphic writing and calendar systems.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe Olmec are best known for their colossal stone heads, massive sculptures carved from single basalt boulders, some weighing over 20 tons. These heads, ranging in height from 4 to 11 feet, depict powerful faces with broad noses, full lips, and distinctive helmets, possibly representing rulers, warriors, or deities. Each head is unique, suggesting they were portraits of specific individuals, immortalizing the elite of Olmec society. Their craftsmanship and sheer scale showcase the Olmec’s sophisticated artistry and technical skills, as well as the logistical prowess needed to transport these giant stones over long distances.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":44156883009676,"sku":"PE","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/Olmec_Style_1a.jpg?v=1763822418"},{"product_id":"undead-broken-olmec-style-2-mythic-legions-1-0","title":"Undead Broken Olmec Style 2 - Mythic legions 1.0","description":"\u003cp class=\"MsoNormal\"\u003eUndead Broken Olmec Style 2 - Mythic legions 1.0\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe Olmec were one of the earliest complex civilizations in Mesoamerica, flourishing from around 1200 to 400 BCE along the Gulf Coast of present-day Mexico. Known for their massive stone heads, intricate jade carvings, and sophisticated urban centers, they laid the cultural groundwork for later civilizations like the Maya and Aztecs. Often called the \"Mother Culture\" of Mesoamerica, the Olmec are famous for their artistry, trade networks, and early use of hieroglyphic writing and calendar systems.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe Olmec are best known for their colossal stone heads, massive sculptures carved from single basalt boulders, some weighing over 20 tons. These heads, ranging in height from 4 to 11 feet, depict powerful faces with broad noses, full lips, and distinctive helmets, possibly representing rulers, warriors, or deities. Each head is unique, suggesting they were portraits of specific individuals, immortalizing the elite of Olmec society. Their craftsmanship and sheer scale showcase the Olmec’s sophisticated artistry and technical skills, as well as the logistical prowess needed to transport these giant stones over long distances.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":44156886614156,"sku":"PM","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/Olmec_Style_2a.jpg?v=1763822403"},{"product_id":"orc-mythic-legions-1-0","title":"Orc - Mythic legions 1.0","description":"\u003cp class=\"MsoNormal\"\u003eOrc Head - Mythic legions 1.0\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":44156888514700,"sku":"PM","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/BaldOrc.jpg?v=1763819925"},{"product_id":"vampress-day-armor-head-mythic-legions-2-0","title":"Vampress Day Armor (The Night's Embrace) Knight Head - Mythic Legions 2.0","description":"\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eVampress Day Armor (The Night's Embrace) Knight Head - Mythic Legions 2.0\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old skull Customs with Art direction by Low Fidelity Customs (Swagneto)\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eHair is cut out to allow for shoulder pads\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003ca name=\"_Hlk195793497\"\u003e\u003c\/a\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking. Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":44156966109324,"sku":"PQ","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/IMG_5476.jpg?v=1748313314"},{"product_id":"atskake-the-wendigo-head-mythic-legions-1-0-and-1-10-scale-figures","title":"Atskaké the Wendigo head - Mythic legions 1.0","description":"\u003cp\u003e\u003cstrong\u003eAtskaké the Wendigo head - Mythic legions 1.0\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":44171242111116,"sku":"NH","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/Wendigo.jpg?v=1763822347"},{"product_id":"kuro-the-whisper-between-tides-mythic-legions-1-0","title":"Kuro, the Whisper Between Tides Kappa Head Red Lily - Mythic Legions 1.0","description":"\u003ch2 style=\"text-align: left;\"\u003e\u003cstrong\u003eKuro, the Whisper Between Tides\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp style=\"text-align: left;\"\u003eKuro was born in the ink-dark waters beneath the Crescent Marsh, the last remnant of an ancient river-blood line. Shaped by sorrow and silence. Drawn from the ghostly swamp mists by a whisper. No more than an itch behind the eyes. Festering, it grew until all else was a hazy drowned landscape.  \u003ca href=\"https:\/\/www.onepercase.com\/pages\/kuro-the-whisper-between-tides\" title=\"Kuro, The Whisper between Tides\" rel=\"noopener\" target=\"_blank\"\u003eread more...\u003c\/a\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eKappa Head, Lily Pad Hat with Lily - Mythic Legions 1.0 scale \u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":44204010537100,"sku":"PSPT","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/IMG_6084_60cc9e0b-0c99-4da7-b3a5-31b97e6ba612.jpg?v=1763822120"},{"product_id":"kuro-the-whisper-between-tides-kappa-head-clear-lily-mythic-legions-1-0","title":"Kuro, the Whisper Between Tides Kappa Head Clear Lily - Mythic Legions 1.0","description":"\u003ch2 style=\"text-align: left;\"\u003e\u003cstrong\u003eKuro, the Whisper Between Tides\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp style=\"text-align: left;\"\u003eKuro was born in the ink-dark waters beneath the Crescent Marsh, the last remnant of an ancient river-blood line. Shaped by sorrow and silence. Drawn from the ghostly swamp mists by a whisper. No more than an itch behind the eyes. Festering, it grew until all else was a hazy drowned landscape.  \u003ca rel=\"noopener\" title=\"Kuro, The Whisper between Tides\" href=\"https:\/\/www.onepercase.com\/pages\/kuro-the-whisper-between-tides\" target=\"_blank\"\u003eread more...\u003c\/a\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eKappa Head, Lily Pad Hat with Clear Lily - Mythic Legions 1.0 scale \u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":44204033147020,"sku":"PSPT","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/IMG_6084_60cc9e0b-0c99-4da7-b3a5-31b97e6ba612.jpg?v=1763822120"},{"product_id":"kuro-the-whisper-between-tides-kappa-head-green-lily-mythic-legions-1-0","title":"Kuro, the Whisper Between Tides Kappa Head Green Lily - Mythic Legions 1.0","description":"\u003ch2 style=\"text-align: left;\"\u003e\u003cstrong\u003eKuro, the Whisper Between Tides\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp style=\"text-align: left;\"\u003eKuro was born in the ink-dark waters beneath the Crescent Marsh, the last remnant of an ancient river-blood line. Shaped by sorrow and silence. Drawn from the ghostly swamp mists by a whisper. No more than an itch behind the eyes. Festering, it grew until all else was a hazy drowned landscape.  \u003ca rel=\"noopener\" title=\"Kuro, The Whisper between Tides\" href=\"https:\/\/www.onepercase.com\/pages\/kuro-the-whisper-between-tides\" target=\"_blank\"\u003eread more...\u003c\/a\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eKappa Head, Lily Pad Hat with Clear Lily - Mythic Legions 1.0 scale \u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":44204034556044,"sku":"PSPT","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/IMG_6062.jpg?v=1763822157"},{"product_id":"kuro-the-whisper-between-tides-kappa-head-grey-mythic-legions-1-0","title":"Kuro, the Whisper Between Tides Kappa Head Grey - Mythic Legions 1.0","description":"\u003ch2 style=\"text-align: left;\"\u003e\u003cstrong\u003eKuro, the Whisper Between Tides\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp style=\"text-align: left;\"\u003eKuro was born in the ink-dark waters beneath the Crescent Marsh, the last remnant of an ancient river-blood line. Shaped by sorrow and silence. Drawn from the ghostly swamp mists by a whisper. No more than an itch behind the eyes. Festering, it grew until all else was a hazy drowned landscape.  \u003ca rel=\"noopener\" title=\"Kuro, The Whisper between Tides\" href=\"https:\/\/www.onepercase.com\/pages\/kuro-the-whisper-between-tides\" target=\"_blank\"\u003eread more...\u003c\/a\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eKappa Head, Lily Pad Hat with Clear Lily - Mythic Legions 1.0 scale \u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":44209494982796,"sku":"PSPT","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/Kappa_Lily_Hat.jpg?v=1763822157"},{"product_id":"old-skull-customs-template-mythic-legions-copy","title":"Orc Warrior Female Head - Mythic legions 2.0","description":"\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eOrc Warrior Female Head - Mythic legions 2.0\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp data-start=\"789\" data-end=\"915\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":44211288473740,"sku":"QB","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/FemaleOrc.jpg?v=1763819680"},{"product_id":"orc-shaman-female-head-mythic-legions-2-0","title":"Orc Shaman Female Head - Mythic legions 2.0","description":"\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eOrc Shaman Female Head - Mythic legions 2.0\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":44211303678092,"sku":"QA","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/FemaleOrcShaman.jpg?v=1763787573"},{"product_id":"sekhmet-the-eye-of-ra-female-head-mythic-legions-2-0","title":"Sekhmet, The Eye of Ra Female head - Mythic legions 2.0","description":"\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eSekhmet, The Eye of Ra, Female head - Mythic Legions 2.0 scale\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThree parts, head, hair\/head piece, and snake \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e(Featured at Paint Night 6-26-25)\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":44256485802124,"sku":"QB","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/IMG_6689.jpg?v=1751380610"},{"product_id":"old-skull-customs-template-mythic-legions-1","title":"Vampire Aristocrat Head with Cross Stake (unpainted)","description":"\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eVampire Aristocrat head with cross stake\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003ePrinted to order in various scales.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e1:10, 1:12, 1:18, Mythic Legions 1.0, Mythic Legions 2.0\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe resin used is subject to change.  Color will vary.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Mythic Legions 1.0","offer_id":44974976237708,"sku":null,"price":9.99,"currency_code":"USD","in_stock":true},{"title":"Mythic Legions 2.0","offer_id":44974976270476,"sku":null,"price":9.99,"currency_code":"USD","in_stock":true},{"title":"1:12 scale","offer_id":44974976303244,"sku":null,"price":9.99,"currency_code":"USD","in_stock":true},{"title":"1:10 scale","offer_id":44974976336012,"sku":null,"price":9.99,"currency_code":"USD","in_stock":true},{"title":"1:18 scale","offer_id":44974976368780,"sku":null,"price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/Vampire_Aristocrat.jpg?v=1763822263"},{"product_id":"vampire-aristocrat-head-with-cross-stake-copy","title":"Lagoon Monster head (unpainted)","description":"\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eLagoon Monster\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003ePrinted to order in various scales.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e1:10, 1:12, 1:18, Mythic Legions 1.0, Mythic Legions 2.0\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe resin used is subject to change.  Color will vary.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Mythic Legions 1.0","offer_id":44974990852236,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"Mythic Legions 2.0","offer_id":44974990885004,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:12 scale","offer_id":44974990917772,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:10 scale","offer_id":44974990950540,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:18 scale","offer_id":44974990983308,"sku":null,"price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/LagoonMonster.jpg?v=1763847023"},{"product_id":"old-skull-male-head-template","title":"Crowned Osiris Head (unpainted)","description":"\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eCrowned Osiris Head\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003ePrinted to order in various scales.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e1:10, 1:12, 1:18, Mythic Legions 1.0, Mythic Legions 2.0\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe resin used is subject to change.  Color will vary.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Mythic Legions 1.0","offer_id":45051109703820,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"Mythic Legions 2.0","offer_id":45051109736588,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:12 scale","offer_id":45051109769356,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:10 scale","offer_id":45051109802124,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:18 scale","offer_id":45051109834892,"sku":null,"price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/CrownedOsiris2.jpg?v=1763905104"},{"product_id":"male-old-skull-template","title":"Pharoah Mummy head (unpainted)","description":"\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003ePharoah Mummy head (unpainted)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003ePrinted to order in various scales.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e1:10, 1:12, 1:18, Mythic Legions 1.0, Mythic Legions 2.0\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe resin used is subject to change.  Color will vary.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Mythic Legions 1.0","offer_id":45051772010636,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"Mythic Legions 2.0","offer_id":45051772043404,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:12 scale","offer_id":45051772076172,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:10 scale","offer_id":45051772108940,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:18 scale","offer_id":45051772141708,"sku":null,"price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/Pharoh_Mummy.jpg?v=1763822263"},{"product_id":"male-old-skull-template-copy","title":"Sobek Head (unpainted)","description":"\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eSobek\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003ePrinted to order in various scales.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e1:10, 1:12, 1:18, Mythic Legions 1.0, Mythic Legions 2.0\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe resin used is subject to change.  Color will vary.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Mythic Legions 1.0","offer_id":45051806777484,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"Mythic Legions 2.0","offer_id":45051806810252,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:12 scale","offer_id":45051806843020,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:10 scale","offer_id":45051806875788,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:18 scale","offer_id":45051806908556,"sku":null,"price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/Sobek1.jpg?v=1763905511"},{"product_id":"male-old-skull-template-copy-1","title":"Viking Santa Head (unpainted)","description":"\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eViking Santa head\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003ePrinted to order in various scales.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e1:10, 1:12, 1:18, Mythic Legions 1.0, Mythic Legions 2.0\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe resin used is subject to change.  Color will vary.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Mythic Legions 1.0","offer_id":45051991916684,"sku":null,"price":9.99,"currency_code":"USD","in_stock":true},{"title":"Mythic Legions 2.0","offer_id":45051991949452,"sku":null,"price":9.99,"currency_code":"USD","in_stock":true},{"title":"1:12 scale","offer_id":45051991982220,"sku":null,"price":9.99,"currency_code":"USD","in_stock":true},{"title":"1:10 scale","offer_id":45051992014988,"sku":null,"price":9.99,"currency_code":"USD","in_stock":true},{"title":"1:18 scale","offer_id":45051992047756,"sku":null,"price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/VikingSanta6.jpg?v=1763905620"},{"product_id":"zombie-bear-unpainted-head","title":"Zombie Bear head - EXCLUSIVE (unpainted)","description":"\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eZombie Bear\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eUnpainted head\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003ePrinted to order in various scales.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e1:10, 1:12, 1:18, Mythic Legions 1.0, Mythic Legions 2.0\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe resin used is subject to change.  Color will vary.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Mythic Legions 1.0","offer_id":45052195668108,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"Mythic Legions 2.0","offer_id":45052195700876,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:12 scale","offer_id":45052195733644,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:10 scale","offer_id":45052195766412,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:18 scale","offer_id":45052195799180,"sku":null,"price":6.99,"currency_code":"USD","in_stock":true},{"title":"For Mythic Legions Bear (Bodvar)","offer_id":49945108119692,"sku":null,"price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/ZombieBear.jpg?v=1763905818"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/collections\/IMG_4009.jpg?v=1749682974","url":"https:\/\/www.onepercase.com\/collections\/old-skull-customs.oembed?page=16","provider":"J's Armory","version":"1.0","type":"link"}