{"title":"Mythic and Cosmic Legion Heads","description":"","products":[{"product_id":"astrid-stormscar-the-valkyrie-head-multiple-hair-choices-mythic-legions-2-0","title":"Astrid Stormscar the Valkyrie head, multiple hair choices - Mythic Legions 2.0","description":"\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eAstrid Stormscar the Valkyrie head, multiple hair choices - Mythic Legions 2.0 scale\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Moaiway\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Long Braid","offer_id":43813264556172,"sku":"MT-2","price":11.99,"currency_code":"USD","in_stock":true},{"title":"Shoulder Length","offer_id":43813264588940,"sku":"MT-3","price":11.99,"currency_code":"USD","in_stock":true},{"title":"Shoulder and Braid","offer_id":43813264621708,"sku":"MT-1","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/9a753443-il_fullxfull.6321452428_aubv.jpg?v=1738686885"},{"product_id":"sir-roland-stormrider-crusader-knight-helmet-and-head-plug-mythic-legions-1-0-and-1-10-scale-figures","title":"Sir Roland Stormrider, crusader knight helmet and head plug – Mythic Legions 1.0","description":"\u003cp class=\"MsoNormal\"\u003e\u003ca name=\"_Hlk195797524\"\u003e\u003c\/a\u003e\u003cb\u003eSir Roland Stormrider, crusader knight helmet and head plug – Mythic Legions 1.0 scale\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e\u003cb\u003eDesigned by Jason Demon Rodriguez\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking. Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThank you so much for considering a purchase! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThank you\u003c\/span\u003e!\u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813265637516,"sku":"JL","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/aa4db160-il_fullxfull.6370561694_68e2.jpg?v=1738686885"},{"product_id":"sir-machete-the-hunter-mythic-legions-1-0-and-1-10-scale-figures","title":"Sir Machete the Hunter  – Mythic Legions 1.0 scale","description":"\u003cp class=\"MsoNormal\"\u003e\u003ca name=\"_Hlk195797524\"\u003e\u003c\/a\u003e\u003cb\u003eSir Machete the Hunter \u003cspan style=\"mso-spacerun: yes;\"\u003e \u003c\/span\u003e– Mythic Legions 1.0 scale\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e\u003cb\u003eDesigned by Jason Demon Rodriguez\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking. Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThank you so much for considering a purchase! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThank you\u003c\/span\u003e!\u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813265703052,"sku":"ND","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/7189b822-il_fullxfull.6429787198_hch0.jpg?v=1738686886"},{"product_id":"punkrot-the-thrasher-mohawk-skull-head-mythic-legions-1-0-and-1-10-scale-figures","title":"Punkrot the Thrasher, mohawk skull head – Mythic Legions 1.0 scale","description":"\u003cp class=\"MsoNormal\"\u003e\u003ca name=\"_Hlk195797524\"\u003e\u003c\/a\u003e\u003cb\u003ePunkrot the Thrasher, mohawk skull head – Mythic Legions 1.0 scale\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e\u003cb\u003eDesigned by Jason Demon Rodriguez\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking. Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThank you so much for considering a purchase! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThank you\u003c\/span\u003e!\u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813267636364,"sku":"JK","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/84c0b9f0-il_fullxfull.6418435177_tu6l.jpg?v=1738686885"},{"product_id":"ferast-the-dwarven-warlord-dwarf-head-scaled-for-mythic-legions-1-0-and-1-10-scale-figures","title":"Ferast the Dwarven Warlord, dwarf head - Mythic Legions 1.0","description":"\u003cp class=\"MsoNormal\"\u003e\u003ca name=\"_Hlk195797524\"\u003e\u003c\/a\u003e\u003cb\u003eFerast the Dwarven Warlord, dwarf head - Mythic Legions 1.0 scale \u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e\u003cb\u003eDesigned by Jason Demon Rodriguez\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking. Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThank you so much for considering a purchase! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThank you\u003c\/span\u003e!\u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813267767436,"sku":"MP","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/de047020-il_fullxfull.6156024500_7l2y.jpg?v=1738686886"},{"product_id":"knight-of-the-veil-walkers-vampire-head-scaled-for-mythic-legions-and-1-10-scale-figures","title":"Knight of the Veil Walkers, vampire head - Mythic Legions 1.0","description":"\u003cp\u003e\u003cstrong\u003eKnight of the Veil Walkers, vampire head - Mythic Legions 1.0\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Veil Walker Head","offer_id":43813268619404,"sku":"JQ-1","price":8.99,"currency_code":"USD","in_stock":true},{"title":"Spiked Helmet","offer_id":43813268652172,"sku":"JQ-2","price":7.99,"currency_code":"USD","in_stock":true},{"title":"Helmet","offer_id":43813268684940,"sku":"JQ-3","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/8f11c8ef-il_fullxfull.6466724961_limz.jpg?v=1738686886"},{"product_id":"withersquash-pumpkin-head-scaled-for-mythic-legions-and-1-10-scale-figures","title":"Withersquash, pumpkin head - Mythic Legions 1.0","description":"\u003cp\u003e\u003cstrong\u003eWithersquash, pumpkin head - Mythic Legions 1.0\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813269602444,"sku":"NE","price":8.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/28010717-il_fullxfull.6429574660_3udm.jpg?v=1738686890"},{"product_id":"malgor-the-flamebane-transparent-flaming-skull-head-choice-of-colors-mythic-legions-1-0","title":"Malgor the Flamebane, transparent flaming skull head Choice of colors - Mythic legions 1.0","description":"\u003cp class=\"MsoNormal\"\u003e\u003ca name=\"_Hlk195797524\"\u003e\u003c\/a\u003e\u003cb\u003eMalgor the Flamebane, transparent flaming skull head Choice of colors - Mythic legions 1.0 scale\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e\u003cb\u003eDesigned by Jason Demon Rodriguez\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking. Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThank you so much for considering a purchase! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThank you\u003c\/span\u003e!\u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Red","offer_id":43813269930124,"sku":"MS-4","price":8.99,"currency_code":"USD","in_stock":true},{"title":"Orange","offer_id":43813269962892,"sku":"MS-6","price":8.99,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":43813269995660,"sku":"MS-7","price":8.99,"currency_code":"USD","in_stock":true},{"title":"Purple","offer_id":43813270028428,"sku":"MS-1","price":8.99,"currency_code":"USD","in_stock":true},{"title":"Pink","offer_id":43813270061196,"sku":"MS-2","price":8.99,"currency_code":"USD","in_stock":true},{"title":"Bright Green","offer_id":43813270093964,"sku":"MS-3","price":8.99,"currency_code":"USD","in_stock":true},{"title":"Green","offer_id":43813270126732,"sku":"MS-5","price":8.99,"currency_code":"USD","in_stock":true},{"title":"Clear","offer_id":43813270159500,"sku":"MS-8","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/1ddc305c-il_fullxfull.6467215629_bd65.jpg?v=1738686886"},{"product_id":"king-dorgar-ravenforge-dwarf-head-scaled-for-mythic-legions-1-0-and-1-10-scale-figures","title":"King Dorgar Ravenforge, Dwarf head - Mythic legions 1.0","description":"\u003cp class=\"MsoNormal\"\u003e\u003ca name=\"_Hlk195797524\"\u003e\u003c\/a\u003e\u003cb\u003eKing Dorgar Ravenforge, Dwarf head - Mythic legions 1.0 scale\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e\u003cb\u003eDesigned by Jason Demon Rodriguez\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking. Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThank you so much for considering a purchase! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThank you\u003c\/span\u003e!\u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813270192268,"sku":"NL","price":8.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/96734072-il_fullxfull.6611441531_hwnx.jpg?v=1738686888"},{"product_id":"auralyn-female-elf-head-mythic-legions-2-0-bodies","title":"Auralyn, Female Elf head - Mythic legions 2.0","description":"\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eAuralyn, Female Elf head - Mythic Legions 2.0 scale \u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813270290572,"sku":"P","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/45fb5aba-il_fullxfull.6562364392_6ehj.jpg?v=1738686885"},{"product_id":"barthrik-shadowhelm-dwarf-head-scaled-for-mythic-legions-1-0-and-1-10-scale-figures","title":"Barthrik Shadowhelm, Dwarf head - Mythic Legions 1.0","description":"\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eBarthrik Shadowhelm, Dwarf head - Mythic Legions 1.0 scale\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Jason Demon Rodriguez\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking. Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813270323340,"sku":"NH","price":8.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/02954297-il_fullxfull.6562319908_evxi.jpg?v=1738686885"},{"product_id":"sir-percival-twirlmane-knight-head-and-face-shield-mythic-legions-1-0-and-1-10-scale-figures","title":"Sir Percival Twirlmane, knight head and face shield – Mythic Legions 1.0 scale","description":"\u003cp class=\"MsoNormal\"\u003e\u003ca name=\"_Hlk195797524\"\u003e\u003c\/a\u003e\u003cb\u003eSir Percival Twirlmane, knight head and face shield – Mythic Legions 1.0 scale\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e\u003cb\u003eDesigned by Jason Demon Rodriguez\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking. Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThank you so much for considering a purchase! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThank you\u003c\/span\u003e!\u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813270356108,"sku":"JQ","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/575a0009-il_fullxfull.6466743125_9nuz.jpg?v=1738686888"},{"product_id":"unpainted-knight-of-the-veil-walkers-knight-head-mythic-legions-1-0","title":"Unpainted Knight of the Veil Walkers, knight head - Mythic legions 1.0","description":"\u003cp\u003e\u003cstrong\u003eUnpainted Knight of the Veil Walkers, knight head - Mythic legions 1.0\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813270421644,"sku":"JQ","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/2f1bc7cf-il_fullxfull.6460555811_2kvo.jpg?v=1738686885"},{"product_id":"voltar-no-helmet-inspired-head-6-and-7-scale-legions-1","title":"Voltar (No helmet) inspired head - 1\/10 scale","description":"\u003cp\u003e\u003cstrong\u003eVoltar (No helmet) inspired head - 1\/10 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813271273612,"sku":"JB","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/VoltarHead.png?v=1772913227"},{"product_id":"morrin-frosthammer-dwarf-head-scaled-for-mythic-legions-1-0-and-1-10-scale-figures","title":"Morrin Frosthammer, dwarf head – Mythic Legions 1.0","description":"\u003cp class=\"MsoNormal\"\u003e\u003ca name=\"_Hlk195797524\"\u003e\u003c\/a\u003e\u003cb\u003eMorrin Frosthammer, dwarf head – Mythic Legions 1.0 scale\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e\u003cb\u003eDesigned by Jason Demon Rodriguez\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking. Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThank you so much for considering a purchase! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThank you\u003c\/span\u003e!\u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813271994508,"sku":"MP","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/9d176d12-il_fullxfull.6159591950_fip6.jpg?v=1738686887"},{"product_id":"spectral-warlord-drakzul-the-orc-skeleton-head-mythic-legions-1-0","title":"Spectral Warlord Drak'zul, orc skull head – Mythic Legions 1.0 scale","description":"\u003cp class=\"MsoNormal\"\u003e\u003ca name=\"_Hlk195797524\"\u003e\u003c\/a\u003e\u003cb\u003eSpectral Warlord Drak'zul, orc skull head – Mythic Legions 1.0 scale\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e\u003cb\u003eDesigned by Jason Demon Rodriguez\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking. Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThank you so much for considering a purchase! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThank you\u003c\/span\u003e!\u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813273010316,"sku":"MI","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/bac751bc-il_fullxfull.6321652088_a490.jpg?v=1738686889"},{"product_id":"spikebrow-the-pachycephalosaurius-head-scaled-for-mythic-legions-1-0-and-1-10-scale-figures","title":"Spikebrow the pachycephalosaurius head – Mythic Legions 1.0 scale","description":"\u003cp class=\"MsoNormal\"\u003e\u003ca name=\"_Hlk195797524\"\u003e\u003c\/a\u003e\u003cb\u003eSpikebrow the pachycephalosaurius head – Mythic Legions 1.0 scale\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e\u003cb\u003eDesigned by Jason Demon Rodriguez\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking. Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThank you so much for considering a purchase! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThank you\u003c\/span\u003e!\u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813274124428,"sku":"LF","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/676ce704-il_fullxfull.6192409526_s366.jpg?v=1738686887"},{"product_id":"morgath-shadowhowl-the-orc-shaman-head-scaled-for-mythic-legions-1-0-and-1-10-scale-figures","title":"Morgath Shadowhowl, orc shaman head – Mythic Legions 1.0","description":"\u003cp class=\"MsoNormal\"\u003e\u003ca name=\"_Hlk195797524\"\u003e\u003c\/a\u003e\u003cb\u003eMorgath Shadowhowl, orc shaman head – Mythic Legions 1.0 scale\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e\u003cb\u003eDesigned by Jason Demon Rodriguez\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking. Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThank you so much for considering a purchase! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThank you\u003c\/span\u003e!\u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813274157196,"sku":"MK","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/d450e8b5-il_fullxfull.6207684209_hgyx.jpg?v=1738686888"},{"product_id":"xolotl-head-scaled-for-mythic-legions-1-0-and-1-10-scale-figures","title":"Xolotl head – Mythic Legions 1.0","description":"\u003cp class=\"MsoNormal\"\u003e\u003ca name=\"_Hlk195797524\"\u003e\u003c\/a\u003e\u003cb\u003eXolotl head – Mythic Legions 1.0 scale\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e\u003cb\u003eDesigned by Jason Demon Rodriguez\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking. Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThank you so much for considering a purchase! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThank you\u003c\/span\u003e!\u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813274878092,"sku":"NH","price":8.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/b02a0620-il_fullxfull.6207831515_mmmn.jpg?v=1738686884"},{"product_id":"nalix-cenoteborn-axolotl-warrior-head-mythic-legions-1-0-and-1-10-scale-figures","title":"Nalix Cenoteborn, axolotl warrior head - Mythic Legions 1.0","description":"\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eNalix Cenoteborn, axolotl warrior head - Mythic Legions 1.0 scale \u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking. Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813275435148,"sku":"NB","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/daf5384b-il_fullxfull.6477809607_a62i.jpg?v=1738686886"},{"product_id":"bardin-frostpick-dwarf-head-scaled-for-mythic-legions-1-0-and-1-10-scale-figures","title":"Bardin Frostpick, Dwarf head- Mythic Legions 1.0","description":"\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eBardin Frostpick, Dwarf head- Mythic Legions 1.0 scale\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Jason Demon Rodriguez\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking. Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813275762828,"sku":"NL","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/495ebeb1-il_fullxfull.6563316458_6egn.jpg?v=1738686885"},{"product_id":"aztec-belt-1-0-for-mythic-legions-and-cosmic-legions","title":"Aztec Belt - Mythic Legions 1.0","description":"\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eAztec Belt - Mythic Legions 1.0 scale \u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Action Figure Fusion\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003ca name=\"_Hlk195793497\"\u003e\u003c\/a\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking. Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813275795596,"sku":"NL","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/24d748ff-il_fullxfull.6611479121_fug5.jpg?v=1738686886"},{"product_id":"kradok-blackhammer-dwarf-head-scaled-for-mythic-legions-1-0-and-1-10-scale-figures","title":"Kradok Blackhammer, dwarf head - Mythic legions 1.0","description":"\u003cp class=\"MsoNormal\"\u003e\u003ca name=\"_Hlk195797524\"\u003e\u003c\/a\u003e\u003cb\u003eKradok Blackhammer, dwarf head - Mythic legions 1.0 scale\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e\u003cb\u003eDesigned by Jason Demon Rodriguez\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking. Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThank you so much for considering a purchase! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThank you\u003c\/span\u003e!\u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813275926668,"sku":"NH","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/a7834793-il_fullxfull.6562309796_og4r.jpg?v=1738686885"},{"product_id":"morrigan-emberveil-the-demon-head-scaled-for-mythic-legions-2-0-and-1-10-scale-figures","title":"Morrigan Emberveil, female demon head – Mythic Legions 2.0","description":"\u003cp class=\"MsoNormal\"\u003e\u003ca name=\"_Hlk195797524\"\u003e\u003c\/a\u003e\u003cb\u003eMorrigan Emberveil, female demon head – Mythic Legions 2.0 scale\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e\u003cb\u003eDesigned by Jason Demon Rodriguez\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking. Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThank you so much for considering a purchase! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThank you\u003c\/span\u003e!\u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813275992204,"sku":"MB","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/d60d049c-il_fullxfull.6309451739_qeb4.jpg?v=1738686885"},{"product_id":"elven-wizard-head-scaled-for-mythic-legions-1-0-and-1-10-scale-figures","title":"Thalionar, elven wizard head - Mythic Legions 1.0","description":"\u003cp class=\"MsoNormal\"\u003e\u003ca name=\"_Hlk195797524\"\u003e\u003c\/a\u003e\u003cb\u003eThalionar, elven wizard head - Mythic Legions 1.0 scale \u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e\u003cb\u003eDesigned by Jason Demon Rodriguez\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking. Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThank you so much for considering a purchase! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThank you\u003c\/span\u003e!\u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813276385420,"sku":"ML","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/f6093cfa-il_fullxfull.6128977156_afnf.jpg?v=1738686886"},{"product_id":"1-12-scale-head-inspired-by-ben-10-diamond-head-classified-compatible-unpainted-by","title":"Ben 10 Diamond Head - 1:10 scale","description":"\u003cp\u003e\u003cstrong\u003eBen 10 Diamond Head - 1\/10 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesigned by JCirion3d\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813276483724,"sku":"BY","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/f8452862-il_fullxfull.6175699903_6ysq.jpg?v=1738686886"},{"product_id":"tetsubo-club-scaled-for-mythic-legions-1-0-and-2-0-scale-figures","title":"Tetsubo club - Mythic legions 1.0 and 2.0","description":"\u003cp class=\"MsoNormal\"\u003e\u003ca name=\"_Hlk195797524\"\u003e\u003c\/a\u003e\u003cb\u003eTetsubo club - scaled for mythic legions 1.0 and 2.0 scale figures\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e\u003cb\u003eDesigned by Jason Demon Rodriguez\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking. Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThank you so much for considering a purchase! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThank you\u003c\/span\u003e!\u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813277008012,"sku":"JR","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/3ce0b03a-il_fullxfull.6418929662_1bxp.jpg?v=1738686886"},{"product_id":"sabertooth-tiger-head-scaled-for-mythic-legions-1-0-and-1-10-scale-figures","title":"Maulgrim, sabertooth tiger head – Mythic Legions 1.0","description":"\u003cp class=\"MsoNormal\"\u003e\u003ca name=\"_Hlk195797524\"\u003e\u003c\/a\u003e\u003cb\u003eMaulgrim, sabertooth tiger head – Mythic Legions 1.0 scale\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e\u003cb\u003eDesigned by Jason Demon Rodriguez\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking. Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThank you so much for considering a purchase! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThank you\u003c\/span\u003e!\u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813277270156,"sku":"NJ","price":8.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/4f56a044-il_fullxfull.6192410292_i2q6.jpg?v=1738686888"},{"product_id":"croakfang-the-goblin-head-1-12-scale-mythic-cosmic-legions-1-0","title":"Croakfang, goblin head - Mythic Legions 1.0","description":"\u003cp class=\"MsoNormal\"\u003e\u003ca name=\"_Hlk195797524\"\u003e\u003c\/a\u003e\u003ca name=\"_Hlk195796727\"\u003e\u003c\/a\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e\u003cb\u003eCroakfang, goblin head - Mythic Legions 1.0 scale \u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking. Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThank you so much for considering a purchase! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThank you\u003c\/span\u003e!\u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813277696140,"sku":"NJ","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/135e0df9-il_fullxfull.6248997336_pdbs.jpg?v=1738686886"},{"product_id":"luchador-wrestler-goblin-head-scaled-for-mythic-legions-2-0-and-1-10-scale-figures","title":"Garra Loca, luchador goblin head - Mythic legions 2.0","description":"\u003cp class=\"MsoNormal\"\u003e\u003ca name=\"_Hlk195797524\"\u003e\u003c\/a\u003e\u003cb\u003eGarra Loca, luchador goblin head - Mythic legions 2.0 scale\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e\u003cb\u003eDesigned by Jason Demon Rodriguez\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking. Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThank you so much for considering a purchase! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThank you!\u003c\/span\u003e\u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813277827212,"sku":"MG","price":8.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/f0a757b4-il_fullxfull.6204083303_1pga.jpg?v=1738686888"},{"product_id":"bearded-orc-head-scaled-for-mythic-legions","title":"Grumvarv, Bearded Orc head - Mythic Legions 1.0","description":"\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eGrumvarv, Bearded Orc head - Mythic Legions 1.0 scale \u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Moaiway\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking. Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813277991052,"sku":"MO","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/73c0c53d-il_fullxfull.6121703348_bdft.jpg?v=1738686888"},{"product_id":"elephant-head-scaled-for-mythic-legions-1-0-and-1-10-scale-figures-g","title":"Brumbar, elephant head - Mythic Legions 1.0","description":"\u003cp class=\"MsoNormal\"\u003e\u003ca name=\"_Hlk195797524\"\u003e\u003c\/a\u003e\u003cb\u003eEl Sombra, chupacabras head - Mythic Legions 1.0 scale \u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e\u003cb\u003eDesigned by Jason Demon Rodriguez\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking. Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThank you so much for considering a purchase! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThank you\u003c\/span\u003e!\u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813278023820,"sku":"MM","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/37db0e2c-il_fullxfull.6046548245_pc3g.jpg?v=1738686886"},{"product_id":"zalith-darkscale-the-reptile-head-scaled-for-mythic-legions-1-0-and-1-10-scale-figures","title":"Zalith Darkscale, reptile head – Mythic Legions 1.0","description":"\u003cp class=\"MsoNormal\"\u003e\u003ca name=\"_Hlk195797524\"\u003e\u003c\/a\u003e\u003cb\u003eZalith Darkscale, reptile head\u003c\/b\u003e \u003cb\u003e– Mythic Legions 1.0 scale\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e\u003cb\u003eDesigned by Jason Demon Rodriguez\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking. Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThank you so much for considering a purchase! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThank you\u003c\/span\u003e!\u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813278089356,"sku":"LF","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/6533245d-il_fullxfull.6207802389_7a11.jpg?v=1738686888"},{"product_id":"asmosdeus-the-magus-head-scaled-for-mythic-legions-1-0-and-1-10-scale-figures","title":"Asmosdeus the Magus - Mythic Legions 1.0","description":"\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eAsmosdeus the Magus Head - Mythic Legions 1.0 scale\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Jason Demon Rodriguez\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813278122124,"sku":"MD","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/47085a8f-il_fullxfull.6076810301_l1pt.jpg?v=1738686886"},{"product_id":"reaper-vampire-head-2-0-mythic-legions","title":"Reaper Vampire head - Mythic Legions 2.0","description":"\u003cp\u003e\u003cstrong\u003eReaper Vampire head - Mythic Legions 2.0\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813279662220,"sku":"P","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/8b265180-il_fullxfull.6611668491_hoye.jpg?v=1738686885"},{"product_id":"shadowbleat-the-evil-goat-head-scaled-for-mythic-legions-1-0-and-1-10-scale-figures","title":"Shadowbleat, evil goat head – Mythic Legions 1.0 scale","description":"\u003cp class=\"MsoNormal\"\u003e\u003ca name=\"_Hlk195797524\"\u003e\u003c\/a\u003e\u003cb\u003eShadowbleat, evil goat head – Mythic Legions 1.0 scale\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e\u003cb\u003eDesigned by Jason Demon Rodriguez\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking. Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThank you so much for considering a purchase! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThank you\u003c\/span\u003e!\u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813279727756,"sku":"MI","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/6650ef09-il_fullxfull.6309751999_5x9g.jpg?v=1738686887"},{"product_id":"sarokahn-the-tiger-head-and-shoulder-fur-ogre-scaled-for-mythic-legions-ogre-bodies","title":"Sarokahn the Tiger, head and Shoulder Fur  - Mythic Legions Ogre scale","description":"\u003cp\u003e\u003cb\u003eSarokahn the Tiger, head and Shoulder Fur  - Mythic Legions Ogre scale\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDesigned by Jason Demon Customs \u0026amp; Designs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813279826060,"sku":"NK","price":19.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/63488b8f-il_fullxfull.6611343893_10v0.jpg?v=1738686885"},{"product_id":"moonrider-the-valkyrie-head-head-scaled-for-mythic-legions-2-0-and-1-10-scale-figures","title":"Moonrider, valkyrie head – Mythic Legions 2.0","description":"\u003cp class=\"MsoNormal\"\u003e\u003ca name=\"_Hlk195797524\"\u003e\u003c\/a\u003e\u003cb\u003eMoonrider, valkyrie head – Mythic Legions 2.0 scale\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e\u003cb\u003eDesigned by Jason Demon Rodriguez\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking. Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThank you so much for considering a purchase! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThank you\u003c\/span\u003e!\u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813279989900,"sku":"MB","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/f06bd045-il_fullxfull.6221344216_r9zu.jpg?v=1738686886"},{"product_id":"dead-men-tell-no-tales-skull-head-mythic-legions-1-0-and-1-10-scale-figures","title":"Dead Men Tell No Tales Skull head - Mythic Legions 1.0","description":"\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDead Men Tell No Tales Skull head - Mythic Legions 1.0 scale \u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking. Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813280088204,"sku":"JJ","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/f2936fb9-il_fullxfull.6416366539_aqli.jpg?v=1738686887"},{"product_id":"mournveil-the-reaper-demon-head-scaled-for-mythic-legions-1-0-and-1-10-scale-figures","title":"Mournveil the Reaper, demon head – Mythic Legions 1.0","description":"\u003cp class=\"MsoNormal\"\u003e\u003ca name=\"_Hlk195797524\"\u003e\u003c\/a\u003e\u003cb\u003eMournveil the Reaper, demon head – Mythic Legions 1.0 scale\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e\u003cb\u003eDesigned by Jason Demon Rodriguez\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking. Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThank you so much for considering a purchase! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThank you\u003c\/span\u003e!\u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813280415884,"sku":"MR","price":8.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/482fa64c-il_fullxfull.6197802412_1k10.jpg?v=1738686885"},{"product_id":"silverleaf-enchantress-female-elf-head-scaled-for-mythic-legions-2-0-and-1-10-scale-figures","title":"Silverleaf, female elf enchantress head – Mythic Legions 2.0 scale","description":"\u003cp class=\"MsoNormal\"\u003e\u003ca name=\"_Hlk195797524\"\u003e\u003c\/a\u003e\u003cb\u003eSilverleaf, female elf enchantress head – Mythic Legions 2.0 scale\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e\u003cb\u003eDesigned by Jason Demon Rodriguez\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking. Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThank you so much for considering a purchase! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThank you\u003c\/span\u003e!\u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813280448652,"sku":"MB","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/80cb8437-il_fullxfull.6240973427_citb.jpg?v=1738686887"},{"product_id":"myr-kul-the-pitkeeper-demon-head-scaled-for-mythic-legions-1-0-and-1-10-scale-figures","title":"Myr’kul the Pitkeeper, demon head – Mythic Legions 1.0","description":"\u003cp class=\"MsoNormal\"\u003e\u003ca name=\"_Hlk195797524\"\u003e\u003c\/a\u003e\u003cb\u003eMyr’kul the Pitkeeper, demon head – Mythic Legions 1.0 scale\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e\u003cb\u003eDesigned by Jason Demon Rodriguez\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking. Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThank you so much for considering a purchase! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThank you\u003c\/span\u003e!\u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813280481420,"sku":"MQ","price":8.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/ad04df91-il_fullxfull.6300057335_bq7b.jpg?v=1738686887"},{"product_id":"xargoth-the-deevil-devil-head-scaled-for-mythic-legions-1-0-and-1-10-scale-figures","title":"Xargoth the Deevil, devil head – Mythic Legions 1.0","description":"\u003cp class=\"MsoNormal\"\u003e\u003ca name=\"_Hlk195797524\"\u003e\u003c\/a\u003e\u003cb\u003eXargoth the Deevil, devil head – Mythic Legions 1.0 scale\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e\u003cb\u003eDesigned by Jason Demon Rodriguez\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking. Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThank you so much for considering a purchase! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThank you\u003c\/span\u003e!\u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813280907404,"sku":"MR","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/a4f47b5f-il_fullxfull.6245032487_n7wv.jpg?v=1738686885"},{"product_id":"iztli-stonefang-the-aztec-reptile-head-scaled-for-mythic-legions-1-0-and-1-10-scale-figures","title":"Iztli Stonefang, the Aztec Reptile head - Mythic Legions 1.0","description":"\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase. Thank you. ****READ ABOVE**** Iztli Stonefang the Aztec Reptile head for 1.0 Mythic Legions Printed in Resione M70\/TH72 Color may vary Designed by Jason Demon 3d Studios  The ( ) Signifies a JsArmory Part Bin Location The heads are sized to pop on Mythic Legions 1.0, if you want to use it on a different neck, please refer to the instructions below. Heads will need to be fitted for the figure you choose. You can get away with sticky tack on the ball peg but a more permanent solution is best. Dremeling, putty, etc may be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole. NO FIGURES ARE INCLUDED. ONLY THE HEAD. There will be differences and imperfections in each piece including small flaws in prints. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Thank you so much for considering a purchase! All hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813280972940,"sku":"LF","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/e73bb2ec-il_fullxfull.6159781934_foc4.jpg?v=1738686885"},{"product_id":"akuma-yoroi-the-demon-samurai-head-scaled-for-mythic-legions-1-0","title":"Akuma Yoroi, the Demon Samurai - Mythic Legions 1.0","description":"\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eAkuma Yoroi, the Demon Samurai - Mythic Legions 1.0 scale \u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Action Figure Fusion\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813281104012,"sku":"ND","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/7fd07b82-il_fullxfull.6477826561_fka0.jpg?v=1738686885"},{"product_id":"kragok-the-twisted-orc-skull-head-mythic-legions-1-0-and-1-10-scale-figures","title":"Kragok the Twisted, orc skull head - Mythic legions 1.0","description":"\u003cp class=\"MsoNormal\"\u003e\u003ca name=\"_Hlk195797524\"\u003e\u003c\/a\u003e\u003cb\u003eKragok the Twisted, orc skull head - Mythic legions 1.0 scale\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e\u003cb\u003eDesigned by Jason Demon Rodriguez\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking. Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThank you so much for considering a purchase! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-bookmark: _Hlk195797524;\"\u003eThank you\u003c\/span\u003e!\u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813281202316,"sku":"JK","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/f96ed019-il_fullxfull.6418446983_lc3z.jpg?v=1738686890"},{"product_id":"gloomgourd-the-malice-melon-head-scaled-for-mythic-legions-and-1-10-scale-figures","title":"Gloomgourd the Malice Melon head -Mythic Legions 1.0","description":"\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eGloomgourd the Malice Melon head -Mythic Legions 1.0 scale \u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eFrom Rogue Printing Machine’s Patreon\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking. Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813281366156,"sku":"JI","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/331ce621-il_fullxfull.6368313732_rmd8.jpg?v=1738686888"},{"product_id":"major-daimio-head-6-gi-joe-classified-7-mythic-legions","title":"Major Daimio head - 6\" GI Joe Classified 7\" Mythic Legions","description":"\u003cp\u003e\u003cstrong\u003eMajor Daimio head - 6\" GI Joe Classified 7\" Mythic Legions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Daimio 6\u0026quot;","offer_id":43813281431692,"sku":"T","price":7.99,"currency_code":"USD","in_stock":true},{"title":"Daimio 7\u0026quot;","offer_id":43813281464460,"sku":"JD","price":7.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/f72bd7e5-il_fullxfull.5535468903_38st.jpg?v=1738686886"},{"product_id":"females-cloth-armor-shoulder-pads-for-mythic-legions-and-cosmic-legions","title":"Female Cloth Armor Pauldrons - Mythic Legions 2.0","description":"\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eFemale Cloth Armor Pauldrons - Mythic Legions 2.0 scale \u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Action Figure Fusion\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003ca name=\"_Hlk195793497\"\u003e\u003c\/a\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking. Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813281595532,"sku":"LK","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/9b96000c-il_fullxfull.6245108905_ck63.jpg?v=1738686886"},{"product_id":"debbie-the-sideburned-demon-head-for-mythic-legions-and-1-10-scale-figures","title":"Debbie, the sideburned demon head - Mythic Legions 1.0","description":"\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDebbie, the sideburned demon head - Mythic Legions 1.0 scale\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Moaiway\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking. Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813281693836,"sku":"MM","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/122105c0-il_fullxfull.6045052966_43um.jpg?v=1738686887"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/collections\/IMG_4511_de22a5d8-ac8d-4299-acc7-3f7cd5604820.jpg?v=1750179244","url":"https:\/\/www.onepercase.com\/collections\/mythic-and-cosmic-legion-heads.oembed?page=29","provider":"J's Armory","version":"1.0","type":"link"}