{"title":"1:18 Scale","description":"","products":[{"product_id":"1-18-scale-crimson-guard-fred-head-inspired-by-gi-joe","title":"Crimson Guard Fred - 1:18 scale","description":"\u003cp\u003e\u003cstrong\u003eCrimson Guard Fred - 1:18 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesigned by JCirion3d\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813268816012,"sku":"HB-14","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/3b0e9b85-il_fullxfull.6491041859_2vbr.jpg?v=1738686887"},{"product_id":"1-18-scale-blaster-head-and-gun-inspired-by-gi-joe-battle-force-2000","title":"Battle Force 2000 Blaster head, mask, and gun - 1:18 scale","description":"\u003cp\u003e\u003cstrong\u003eBattle Force 2000 Blaster head, mask, and gun - 1:18 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHead and Mask designed by JCirion3d\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eGun designed by OnePerCase\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813268848780,"sku":"HA-1","price":9.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/abb1da4d-il_fullxfull.6442880186_fmgj.jpg?v=1738686886"},{"product_id":"1-18-scale-darkclaw-head","title":"Darkclaw - 1:18 scale","description":"\u003cp\u003e\u003cstrong\u003eDarkclaw - 1:18 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesigned by JCirion3d\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813268881548,"sku":"HB-13","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/b4729545-il_fullxfull.6442819718_cy19.jpg?v=1738686886"},{"product_id":"1-18-scale-motor-viper-head-inspired-by-gi-joe","title":"Motor Viper - 1:18 scale","description":"\u003cp\u003e\u003cstrong\u003eMotor Viper - 1:18 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesigned by JCirion3d\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813272453260,"sku":"HB-24","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/2d3bba5e-il_fullxfull.6442922354_fjs8.jpg?v=1738686887"},{"product_id":"1-18-scale-alley-viper-v2-head-inspired-by-gi-joe","title":"Alley Viper V2 - 1:18 scale","description":"\u003cp\u003e\u003cb\u003eAlley Viper V2 - 1:18 scale \u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDesigned by JCirion3d\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813272486028,"sku":"HA-11","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/679d01c5-il_fullxfull.6490995107_r0g2.jpg?v=1738686887"},{"product_id":"1-18-scale-classic-overkill-head-inspired-by-gi-joe","title":"Classic Overkill - 1:18 scale","description":"\u003cp\u003e\u003cstrong\u003eClassic Overkill - 1:18 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesigned by JCirion3d\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813272518796,"sku":"HA-13","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/0edc2fc8-il_fullxfull.6490936065_fyqn.jpg?v=1738686888"},{"product_id":"1-18-scale-dreadnok-logo-head-inspired-by-gi-joe","title":"Dreadnok Logo Head - 1:18 scale","description":"\u003cp\u003e\u003cstrong\u003eDreadnok Logo Head - 1:18 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesigned by JCirion3d\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813272551564,"sku":"HA-8","price":5.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/97db2a6d-il_fullxfull.6490925509_hg4f.jpg?v=1738686887"},{"product_id":"1-18-scale-hydro-viper-head-inspired-by-gi-joe","title":"Hydro Viper - 1:18 scale","description":"\u003cp\u003e\u003cstrong\u003eHydro Viper - 1:18 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesigned by JCirion3d\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813272649868,"sku":"HB-18","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/48d40291-il_fullxfull.6490859755_fhp0.jpg?v=1738686887"},{"product_id":"1-18-scale-avalanche-head-mic-and-gun-inspired-by-gi-joe-battle-force-2000","title":"Battle Force 2000 Avalanche Head, Mic, and Gun - 1:18 scale","description":"\u003cp\u003e\u003cstrong\u003eBattle Force 2000 Avalanche Head, Mic, and Gun - 1:18 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHead and Mic designed by JCirion3d\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eGun designed by OnePerCase\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813277433996,"sku":"HA-2","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/81a56502-il_fullxfull.6491025589_7if3.jpg?v=1738686886"},{"product_id":"1-18-scale-iron-grenadiers-voltar-head-inspired-by-gi-joe","title":"Iron Grenadiers Voltar head and gun - 1:18 scale","description":"\u003cp\u003e\u003cstrong\u003eIron Grenadiers Voltar head and gun - 1:18 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesigned by JCirion3d\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813277466764,"sku":"HB-25","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/VoltarHeadHelmetGun.png?v=1772913573"},{"product_id":"1-18-scale-deejay-head-and-gun-inspired-by-gi-joe-antenna-not-pictured","title":"DeeJay Head and Gun - 1:18 scale (Antenna not pictured)","description":"\u003cp\u003e\u003cstrong\u003eDeeJay Head and Gun - 1:18 scale (Antenna not pictured)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesigned by JCirion3d\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813277499532,"sku":"HA-5","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/adaefc0b-il_fullxfull.6442901688_jzd0.jpg?v=1738686886"},{"product_id":"1-18-scale-iron-grenadiers-ferret-head-inspired-by-gi-joe","title":"Iron Grenadiers Ferret - 1:18 scale","description":"\u003cp\u003e\u003cstrong\u003eIron Grenadiers Ferret - 1:18 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesigned by JCirion3d\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813277532300,"sku":"HB-12","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/a39ffdb8-il_fullxfull.6442911778_4iuc.jpg?v=1738686886"},{"product_id":"1-18-scale-modernized-overkill-head-inspired-by-gi-joe","title":"Modernized Overkill - 1:18 scale","description":"\u003cp\u003e\u003cstrong\u003eModernized Overkill - 1:18 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesigned by JCirion3d\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813277597836,"sku":"HB-6","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/620b8847-il_fullxfull.6442791300_9yg6.jpg?v=1738686886"},{"product_id":"1-18-scale-strato-viper-head-inspired-by-gi-joe","title":"Strato-Viper - 1:18 scale","description":"\u003cp\u003e\u003cstrong\u003eStrato-Viper - 1:18 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesigned by JCirion3d\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813277630604,"sku":"HB-26","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/a951ca8d-il_fullxfull.6490968525_gmh5.jpg?v=1738686886"},{"product_id":"1-18-scale-resolute-snake-eyes-head-inspired-by-gi-joe","title":"Resolute Snake Eyes - 1:18 scale","description":"\u003cp\u003e\u003cstrong\u003eResolute Snake Eyes - 1:18 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesigned by JCirion3d\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813281497228,"sku":"HB-14","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/05000d91-il_fullxfull.6491012719_5fyv.jpg?v=1738686886"},{"product_id":"1-18-scale-darklon-head-and-gun-inspired-by-gi-joe","title":"Darklon head and gun - 1:18 scale","description":"\u003cp\u003e\u003cstrong\u003eDarklon head and gun - 1:18 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHead designed by JCirion3d\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eGun designed by OnePerCase\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813281529996,"sku":"HB-15","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/702c16c1-il_fullxfull.6442872778_e6qo.jpg?v=1738686886"},{"product_id":"1-18-scale-cthulu-commander-head-inspired-by-gi-joe","title":"Cthulu Commander - 1:18 scale","description":"\u003cp\u003e\u003cb\u003eCthulu Commander - 1:18 scale\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDesigned by JCirion3d\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813281562764,"sku":"HB-28","price":5.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/553188a9-il_fullxfull.6442772566_45ny.jpg?v=1738686887"},{"product_id":"1-18-scale-raziel-head-inspired-by-soul-reaver","title":"Raziel head Inspired by Soul Reaver - 1:18 scale","description":"\u003cp\u003e\u003cstrong\u003eRaziel head Inspired by Soul Reaver - 1:18 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesigned by Jcirion3d\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813285494924,"sku":"HB-23","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/6fe3c98a-il_fullxfull.6490877311_m2no.jpg?v=1738686886"},{"product_id":"1-18-scale-killer-crocmaster-head-inspired-by-gi-joe","title":"Killer Crocmaster - 1:18 scale","description":"\u003cp\u003e\u003cstrong\u003eKiller Crocmaster - 1:18 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesigned by JCirion3d\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813285527692,"sku":"HB-16","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/1403adf8-il_fullxfull.6442850918_6mtf.jpg?v=1738686886"},{"product_id":"1-18-scale-silverbeard-skull-head-inspired-by-js-skull-1","title":"1:18 scale Silverbeard Skull head Inspired by Js Skull","description":"***PLEASE NOTE***\n\nAction figure scales vary widely.  We try to hit the Classified 1\/12 and the McF\/Mythic 1.0 scales.  Please use photo references with figures for sizing.  You are responsible for choosing the best size pieces for your figure.  Js Armory does not accept returns for mistakes in size.  IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.  Thank you.\n\n****READ ABOVE****\n\n3d printed 1:18 Scaled head: Silverbeard\n\nPrinted in M70\/TH72\n\nNO FIGURES ARE INCLUDED. ONLY THE HEAD\n\nThere will be differences and imperfections in each piece including small flaws in prints. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care.\n\nHeads will need to be fitted for the figure you choose. You can get away with sticky tack on the ball peg but a more permanent solution is best. Dremeling, putty, etc may be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\n\nThank you so much for considering a purchase!","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813391859852,"sku":"HB-30","price":5.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/18eafcfe-il_fullxfull.6442947596_81qj.jpg?v=1738689210"},{"product_id":"1-18-scale-techno-viper-head-inspired-by-gi-joe-2","title":"Techno-Viper head - 1:18 scale","description":"\u003cp\u003e\u003cb\u003eTechno-Viper head - 1:18 scale\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDesigned by JCirion3d\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813864571020,"sku":"HB-20","price":5.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/af457e16-il_fullxfull.6442949976_57fr.jpg?v=1738699915"},{"product_id":"1-18-scale-death-viper-head-inspired-by-gi-joe-2","title":"Death Viper - 1:18 scale","description":"\u003cp\u003e\u003cb\u003eDeath Viper - 1:18 scale \u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDesigned by JCirion3d\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813877842060,"sku":"HA-15","price":5.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/2e0b1e94-il_fullxfull.6442860250_nd30.jpg?v=1738699916"},{"product_id":"1-18-scale-avac-head-inspired-by-gi-joe-3","title":"1:18 scale AVAC head Inspired by GI Joe","description":"\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e1:18 scale AVAC head Inspired by GI Joe\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by JCirion3d\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchased pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43815003390092,"sku":"HB-31","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/05efeb16-il_fullxfull.6491038185_iu9p.jpg?v=1738721429"},{"product_id":"1-18-scale-dodger-head-mic-and-gun-inspired-by-gi-joe-battle-force-2003","title":"Battle Force 2000 Dodger Head, Mic and Gun - 1:18 scale","description":"\u003cp\u003e\u003cstrong\u003eBattle Force 2000 Dodger Head, Mic and Gun - 1:18 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesigned by JCirion3d\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43815003422860,"sku":"HA-4","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/DodgerHead.png?v=1773086518"},{"product_id":"dreadnok-logo-with-jaw-head-1-18-scale","title":"Dreadnok Logo with Jaw Head - 1:18 scale","description":"\u003cp\u003e\u003cstrong\u003eDreadnok Logo with Jaw Head - 1:18 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesigned by JCirion3d\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":44166280577164,"sku":"HA-7","price":5.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/2f0c2dd4-il_fullxfull.6442825182_cw6d.jpg?v=1738686886"},{"product_id":"old-skull-customs-template-mythic-legions-1","title":"Vampire Aristocrat Head with Cross Stake (unpainted)","description":"\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eVampire Aristocrat head with cross stake\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003ePrinted to order in various scales.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e1:10, 1:12, 1:18, Mythic Legions 1.0, Mythic Legions 2.0\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe resin used is subject to change.  Color will vary.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Mythic Legions 1.0","offer_id":44974976237708,"sku":null,"price":9.99,"currency_code":"USD","in_stock":true},{"title":"Mythic Legions 2.0","offer_id":44974976270476,"sku":null,"price":9.99,"currency_code":"USD","in_stock":true},{"title":"1:12 scale","offer_id":44974976303244,"sku":null,"price":9.99,"currency_code":"USD","in_stock":true},{"title":"1:10 scale","offer_id":44974976336012,"sku":null,"price":9.99,"currency_code":"USD","in_stock":true},{"title":"1:18 scale","offer_id":44974976368780,"sku":null,"price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/Vampire_Aristocrat.jpg?v=1763822263"},{"product_id":"vampire-aristocrat-head-with-cross-stake-copy","title":"Lagoon Monster head (unpainted)","description":"\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eLagoon Monster\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003ePrinted to order in various scales.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e1:10, 1:12, 1:18, Mythic Legions 1.0, Mythic Legions 2.0\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe resin used is subject to change.  Color will vary.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Mythic Legions 1.0","offer_id":44974990852236,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"Mythic Legions 2.0","offer_id":44974990885004,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:12 scale","offer_id":44974990917772,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:10 scale","offer_id":44974990950540,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:18 scale","offer_id":44974990983308,"sku":null,"price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/LagoonMonster.jpg?v=1763847023"},{"product_id":"old-skull-male-head-template","title":"Crowned Osiris Head (unpainted)","description":"\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eCrowned Osiris Head\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003ePrinted to order in various scales.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e1:10, 1:12, 1:18, Mythic Legions 1.0, Mythic Legions 2.0\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe resin used is subject to change.  Color will vary.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Mythic Legions 1.0","offer_id":45051109703820,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"Mythic Legions 2.0","offer_id":45051109736588,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:12 scale","offer_id":45051109769356,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:10 scale","offer_id":45051109802124,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:18 scale","offer_id":45051109834892,"sku":null,"price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/CrownedOsiris2.jpg?v=1763905104"},{"product_id":"male-old-skull-template","title":"Pharoah Mummy head (unpainted)","description":"\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003ePharoah Mummy head (unpainted)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003ePrinted to order in various scales.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e1:10, 1:12, 1:18, Mythic Legions 1.0, Mythic Legions 2.0\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe resin used is subject to change.  Color will vary.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Mythic Legions 1.0","offer_id":45051772010636,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"Mythic Legions 2.0","offer_id":45051772043404,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:12 scale","offer_id":45051772076172,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:10 scale","offer_id":45051772108940,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:18 scale","offer_id":45051772141708,"sku":null,"price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/Pharoh_Mummy.jpg?v=1763822263"},{"product_id":"male-old-skull-template-copy","title":"Sobek Head (unpainted)","description":"\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eSobek\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003ePrinted to order in various scales.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e1:10, 1:12, 1:18, Mythic Legions 1.0, Mythic Legions 2.0\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe resin used is subject to change.  Color will vary.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Mythic Legions 1.0","offer_id":45051806777484,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"Mythic Legions 2.0","offer_id":45051806810252,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:12 scale","offer_id":45051806843020,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:10 scale","offer_id":45051806875788,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:18 scale","offer_id":45051806908556,"sku":null,"price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/Sobek1.jpg?v=1763905511"},{"product_id":"male-old-skull-template-copy-1","title":"Viking Santa Head (unpainted)","description":"\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eViking Santa head\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003ePrinted to order in various scales.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e1:10, 1:12, 1:18, Mythic Legions 1.0, Mythic Legions 2.0\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe resin used is subject to change.  Color will vary.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Mythic Legions 1.0","offer_id":45051991916684,"sku":null,"price":9.99,"currency_code":"USD","in_stock":true},{"title":"Mythic Legions 2.0","offer_id":45051991949452,"sku":null,"price":9.99,"currency_code":"USD","in_stock":true},{"title":"1:12 scale","offer_id":45051991982220,"sku":null,"price":9.99,"currency_code":"USD","in_stock":true},{"title":"1:10 scale","offer_id":45051992014988,"sku":null,"price":9.99,"currency_code":"USD","in_stock":true},{"title":"1:18 scale","offer_id":45051992047756,"sku":null,"price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/VikingSanta6.jpg?v=1763905620"},{"product_id":"zombie-bear-unpainted-head","title":"Zombie Bear head - EXCLUSIVE (unpainted)","description":"\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eZombie Bear\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eUnpainted head\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003ePrinted to order in various scales.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e1:10, 1:12, 1:18, Mythic Legions 1.0, Mythic Legions 2.0\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe resin used is subject to change.  Color will vary.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Mythic Legions 1.0","offer_id":45052195668108,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"Mythic Legions 2.0","offer_id":45052195700876,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:12 scale","offer_id":45052195733644,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:10 scale","offer_id":45052195766412,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:18 scale","offer_id":45052195799180,"sku":null,"price":6.99,"currency_code":"USD","in_stock":true},{"title":"For Mythic Legions Bear (Bodvar)","offer_id":49945108119692,"sku":null,"price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/ZombieBear.jpg?v=1763905818"},{"product_id":"old-skull-male-template","title":"The Majestic Slimescourge, slime king head (unpainted)","description":"\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eThe Majestic Slimescourge, slime king head (unpainted)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003ePrinted to order in various scales.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e1:10, 1:12, 1:18, Mythic Legions 1.0, Mythic Legions 2.0\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe resin used is subject to change.  Color will vary.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Mythic Legions 1.0","offer_id":45052830646412,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"Mythic Legions 2.0","offer_id":45052830679180,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:12 scale","offer_id":45052830711948,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:10 scale","offer_id":45052830744716,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:18 scale","offer_id":45052830777484,"sku":null,"price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/Slime_King.jpg?v=1763819648"},{"product_id":"akharis-v2-with-eye-mummy-head-unpainted","title":"Akharis v2 with eye, Mummy head (unpainted)","description":"\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eAkharis v2 with eye, Mummy head (unpainted)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003ePrinted to order in various scales.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e1:10, 1:12, 1:18, Mythic Legions 1.0, Mythic Legions 2.0\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe resin used is subject to change.  Color will vary.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Mythic Legions 1.0","offer_id":45052941992076,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"Mythic Legions 2.0","offer_id":45052942024844,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:12 scale","offer_id":45052942057612,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:10 scale","offer_id":45052942090380,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:18 scale","offer_id":45052942123148,"sku":null,"price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/Mummy_with_eye.jpg?v=1763822263"},{"product_id":"old-skull-male-template-copy","title":"Tartalo v2 in helmet (unpainted)","description":"\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eTartalo v2 in helmet \u003c\/strong\u003e\u003cstrong\u003e(unpainted)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003ePrinted to order in various scales.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e1:10, 1:12, 1:18, Mythic Legions 1.0, Mythic Legions 2.0\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe resin used is subject to change.  Color will vary.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Mythic Legions 1.0","offer_id":45053027156108,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"Mythic Legions 2.0","offer_id":45053027188876,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:12 scale","offer_id":45053027221644,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:10 scale","offer_id":45053027254412,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:18 scale","offer_id":45053027287180,"sku":null,"price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/Tartalo_Helmet.jpg?v=1763822263"},{"product_id":"ra-head-unpainted","title":"Ra head (unpainted)","description":"\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eRa head (unpainted)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003ePrinted to order in various scales.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e1:10, 1:12, 1:18, Mythic Legions 1.0, Mythic Legions 2.0\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe resin used is subject to change.  Color will vary.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Mythic Legions 1.0","offer_id":45053445439628,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"Mythic Legions 2.0","offer_id":45053445472396,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:12 scale","offer_id":45053445505164,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:10 scale","offer_id":45053445537932,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:18 scale","offer_id":45053445570700,"sku":null,"price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/Ra1.png?v=1763819650"},{"product_id":"bibi-head-unpainted","title":"Babi head (unpainted)","description":"\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eBibi head (unpainted)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003ePrinted to order in various scales.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e1:10, 1:12, 1:18, Mythic Legions 1.0, Mythic Legions 2.0\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe resin used is subject to change.  Color will vary.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Mythic Legions 1.0","offer_id":45053533749388,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"Mythic Legions 2.0","offer_id":45053533782156,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:12 scale","offer_id":45053533814924,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:10 scale","offer_id":45053533847692,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:18 scale","offer_id":45053533880460,"sku":null,"price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/Babi.png?v=1763819651"},{"product_id":"jack-marrow-pumpkin-head-unpainted","title":"Jack Marrow, pumpkin head (unpainted)","description":"\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eJack Marrow, pumpkin head (unpainted)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003ePrinted to order in various scales.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e1:10, 1:12, 1:18, Mythic Legions 1.0, Mythic Legions 2.0, Mythic Legions 1.0 with 1.0 Shoulder pads\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe resin used is subject to change.  Color will vary.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Mythic Legions 1.0","offer_id":45053688250508,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"Mythic Legions 2.0","offer_id":45053688283276,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:12 scale","offer_id":45053688316044,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:10 scale","offer_id":45053688348812,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:18 scale","offer_id":45053688381580,"sku":null,"price":6.99,"currency_code":"USD","in_stock":true},{"title":"Mythic Legions 1.0 with 1.0 Shoulder Pads","offer_id":45053773480076,"sku":null,"price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/Pumpkin.png?v=1763819650"},{"product_id":"wickwraith-the-waxman-candle-monster-head-unpainted","title":"The Wickwraith, candle demon head (unpainted)","description":"\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eWickwraith, the waxman candle monster head (unpainted)\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003ePrinted to order in various scales.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e1:10, 1:12, 1:18, Mythic Legions 1.0, Mythic Legions 2.0\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe resin used is subject to change.  Color will vary.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Mythic Legions 1.0","offer_id":45053890855052,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"Mythic Legions 2.0","offer_id":45053890887820,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:12 scale","offer_id":45053890920588,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:10 scale","offer_id":45053890953356,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:18 scale","offer_id":45053890986124,"sku":null,"price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/Waxman_Meltedpng.png?v=1763819650"},{"product_id":"sugar-glitch-the-upgrade-candy-monster-head-unpainted","title":"Sugar Glitch the wormy candy monster head (unpainted)","description":"\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eSugar Glitch the wormy candy monster head (unpainted)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003ePrinted to order in various scales.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e1:10, 1:12, 1:18, Mythic Legions 1.0, Mythic Legions 2.0\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe resin used is subject to change.  Color will vary.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Mythic Legions 1.0","offer_id":45054148280460,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"Mythic Legions 2.0","offer_id":45054148313228,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:12 scale","offer_id":45054148345996,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:10 scale","offer_id":45054148378764,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:18 scale","offer_id":45054148411532,"sku":null,"price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/Candy_Monster_Worms.png?v=1763819650"},{"product_id":"molasses-maw-the-candyman-head-unpainted","title":"Molasses Maw, the candy monster head  (unpainted)","description":"\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eMolasses Maw the candyman head  (unpainted)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003ePrinted to order in various scales.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e1:10, 1:12, 1:18, Mythic Legions 1.0, Mythic Legions 2.0\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe resin used is subject to change.  Color will vary.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Mythic Legions 1.0","offer_id":45054340366476,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"Mythic Legions 2.0","offer_id":45054340399244,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:12 scale","offer_id":45054340432012,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:10 scale","offer_id":45054340464780,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:18 scale","offer_id":45054340497548,"sku":null,"price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/Candy_Monster.png?v=1763819650"},{"product_id":"frankie-v2-armored-head-unpainted","title":"Frankie v2, upgraded armored head (unpainted)","description":"\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eFrankie v2, armored head (unpainted)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003ePrinted to order in various scales.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e1:10, 1:12, 1:18, Mythic Legions 1.0, Mythic Legions 2.0\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe resin used is subject to change.  Color will vary.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Mythic Legions 1.0","offer_id":45054469996684,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"Mythic Legions 2.0","offer_id":45054470029452,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:12 scale","offer_id":45054470062220,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:10 scale","offer_id":45054470094988,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:18 scale","offer_id":45054470127756,"sku":null,"price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/Frankie_Robo2.png?v=1763819650"},{"product_id":"frankie-frankenstein-monster-head-unpainted","title":"Frankie, frankenstein monster head (unpainted)","description":"\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eFrankie v2, armored head (unpainted)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003ePrinted to order in various scales.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e1:10, 1:12, 1:18, Mythic Legions 1.0, Mythic Legions 2.0\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe resin used is subject to change.  Color will vary.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Mythic Legions 1.0","offer_id":45054561845388,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"Mythic Legions 2.0","offer_id":45054561878156,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:12 scale","offer_id":45054561910924,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:10 scale","offer_id":45054561943692,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:18 scale","offer_id":45054561976460,"sku":null,"price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/Frankie.png?v=1763819650"},{"product_id":"head-unpainted","title":"The Cursed, mask head (unpainted)","description":"\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eThe Cursed, mask head (unpainted)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003ePrinted to order in various scales.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e1:10, 1:12, 1:18, Mythic Legions 1.0, Mythic Legions 2.0\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe resin used is subject to change.  Color will vary.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Mythic Legions 1.0","offer_id":45055062868108,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"Mythic Legions 2.0","offer_id":45055062900876,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:12 scale","offer_id":45055062933644,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:10 scale","offer_id":45055062966412,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:18 scale","offer_id":45055062999180,"sku":null,"price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/Masked_Possessed_2ef02d7f-99ee-4a44-b252-fd8824c39c53.png?v=1763908026"},{"product_id":"the-masked-horror-head-unpainted","title":"The Masked, horror head (unpainted)","description":"\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eThe Masked, horror head (unpainted)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003ePrinted to order in various scales.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e1:10, 1:12, 1:18, Mythic Legions 1.0, Mythic Legions 2.0\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe resin used is subject to change.  Color will vary.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Mythic Legions 1.0","offer_id":45055296176268,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"Mythic Legions 2.0","offer_id":45055296209036,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:12 scale","offer_id":45055296241804,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:10 scale","offer_id":45055296274572,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:18 scale","offer_id":45055296307340,"sku":null,"price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/Masked.png?v=1763819650"},{"product_id":"gorehog-pigface-head-unpainted","title":"Gorehog the Pigface head (unpainted)","description":"\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eGorehog Pigface head (unpainted)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003ePrinted to order in various scales.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e1:10, 1:12, 1:18, Mythic Legions 1.0, Mythic Legions 2.0\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe resin used is subject to change.  Color will vary.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Mythic Legions 1.0","offer_id":45055425478796,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"Mythic Legions 2.0","offer_id":45055425511564,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:12 scale","offer_id":45055425544332,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:10 scale","offer_id":45055425577100,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:18 scale","offer_id":45055425609868,"sku":null,"price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/Piggy_Mask.png?v=1763819650"},{"product_id":"the-warden-of-the-eternal-flame-candle-demon-head-unpainted","title":"The Warden of the Eternal Flame, candle demon head (unpainted)","description":"\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eThe Warden of the Eternal Flame, candle demon head (unpainted)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003ePrinted to order in various scales.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e1:10, 1:12, 1:18, Mythic Legions 1.0, Mythic Legions 2.0\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe resin used is subject to change.  Color will vary.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Mythic Legions 1.0","offer_id":45055560908940,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"Mythic Legions 2.0","offer_id":45055560941708,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:12 scale","offer_id":45055560974476,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:10 scale","offer_id":45055561007244,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:18 scale","offer_id":45055561040012,"sku":null,"price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/Waxman.png?v=1763819650"},{"product_id":"luxe-infernik-filthy-rich-imp-head-unpainted","title":"Luxe Infernik, filthy rich imp head (unpainted)","description":"\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eLuxe Infernik, filthy rich imp head (unpainted)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003ePrinted to order in various scales.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e1:10, 1:12, 1:18, Mythic Legions 1.0, Mythic Legions 2.0\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe resin used is subject to change.  Color will vary.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Mythic Legions 1.0 dwarf\/goblin body","offer_id":45055806898316,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"Mythic Legions 2.0 goblin body","offer_id":45055806931084,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:12 scale","offer_id":45055806963852,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:10 scale","offer_id":45055806996620,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:18 scale","offer_id":45055807029388,"sku":null,"price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/ImpRich.jpg?v=1763819648"},{"product_id":"mossnib-the-goblin-shaman-head-unpainted","title":"Mossnib, the goblin shaman head (unpainted)","description":"\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eMossnib the goblin shaman head (unpainted)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003ePrinted to order in various scales.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e1:10, 1:12, 1:18, Mythic Legions 1.0, Mythic Legions 2.0\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe resin used is subject to change.  Color will vary.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Mythic Legions 1.0 goblin\/dwarf body","offer_id":45056103284876,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"Mythic Legions 2.0 goblin body","offer_id":45056103317644,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:12 scale","offer_id":45056103350412,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:10 scale","offer_id":45056103383180,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:18 scale","offer_id":45056103415948,"sku":null,"price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/goblinshaman2.jpg?v=1763819647"},{"product_id":"grimble-the-goblin-head-unpainted","title":"Grimble, the goblin head (unpainted)","description":"\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eGrimble, the goblin head (unpainted)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by Old Skull Customs\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003ePrinted to order in various scales.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e1:10, 1:12, 1:18, Mythic Legions 1.0, Mythic Legions 2.0\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe resin used is subject to change.  Color will vary.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Mythic Legions 1.0 goblin\/dwarf body","offer_id":45056124878988,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"Mythic Legions 2.0 goblin body","offer_id":45056124911756,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:12 scale","offer_id":45056124944524,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:10 scale","offer_id":45056124977292,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true},{"title":"1:18 scale","offer_id":45056125010060,"sku":null,"price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/Goblin.jpg?v=1763819647"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/collections\/ChatGPT_Image_Jun_3_2025_08_10_04_AM.png?v=1748963468","url":"https:\/\/www.onepercase.com\/collections\/1-18-scale.oembed?page=13","provider":"J's Armory","version":"1.0","type":"link"}