{"title":"1:12 Scale","description":"","products":[{"product_id":"voltar-no-helmet-inspired-head-6-and-7-scale-legions","title":"Voltar (No helmet) inspired head - 1\/12 scale","description":"\u003cp\u003e\u003cstrong\u003eVoltar (No helmet) inspired head - 1\/12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43799079714956,"sku":"G","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/VoltarHead.png?v=1772913227"},{"product_id":"battle-force-2000-knockdown-head-and-gun-kit-1-12-scale","title":"Battle force 2000 Knockdown Gun - 1\/12 scale","description":"\u003cp\u003e\u003cstrong\u003eBattle force 2000 Knockdown Head and Gun kit - 1\/12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGun Designed by OnePerCase\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43799079780492,"sku":"KJ","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/Screenshot_2025-06-16_204240.png?v=1750131799"},{"product_id":"m-16-with-m203-grenade-launcher-1-12-scale","title":"M-16 with m203 grenade launcher - 1\/12 scale","description":"\u003cp\u003e\u003cstrong\u003eM-16 with m203 grenade launcher - 1\/12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813264457868,"sku":"W","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/77e3dd62-il_fullxfull.6254567161_hov1.jpg?v=1738686885"},{"product_id":"combat-shotgun-1-12-scale","title":"Combat shotgun - 1\/12 scale","description":"\u003cp\u003eCombat shotgun - 1\/12 scale\u003c\/p\u003e\n\u003cp\u003eDESIGNED BY 3DDIOS\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813264687244,"sku":"U","price":7.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/2a820bf0-il_fullxfull.6156455908_n3cr.jpg?v=1738686884"},{"product_id":"shoulder-harness-with-dual-holsters-guns-now-included-classified-compatible-1-12-scale","title":"Shoulder harness with dual holsters and guns - 1\/12 scale","description":"\u003cp\u003e\u003cstrong\u003eShoulder harness with dual holsters and guns - 1\/12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813264916620,"sku":"KT","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/0062e41a-il_fullxfull.6251047337_1gzv.jpg?v=1738686885"},{"product_id":"darklon-large-armor-bits-kit-1-12-scale-classified-compatible","title":"Darklon Large Armor Bits Kit - 1\/12 scale","description":"\u003cp\u003e\u003cstrong\u003eDarklon Large Armor Bits Kit - 1\/12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eParts designed by Meetbeef and OnePerCase\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSized for GI Joe Classified Roadblock\/Gung Ho bodies\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813265244300,"sku":null,"price":25.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/99ef83b3-il_fullxfull.4528959673_hdi1.jpg?v=1738686884"},{"product_id":"iron-grenadier-bat-attachments-mini-gatlings-swords-2-handed-gatling-red-gold-and-gold-1-12-scale-gi-joe-classified-compatible","title":"Iron Grenadier mini gatlings, swords, 2 handed gatling red\/gold and gold - 1\/12 scale BAT Attachments","description":"\u003cp\u003e\u003cstrong\u003eIron grenadier mini gatlings, swords, 2 handed gatling red\/gold and gold - 1\/12 scale BAT Attachments\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Red GoldMiniGatlingx2","offer_id":43813265277068,"sku":"AB-1","price":9.99,"currency_code":"USD","in_stock":false},{"title":"Gold Mini Gatlingx2","offer_id":43813265309836,"sku":"AH-2","price":9.99,"currency_code":"USD","in_stock":true},{"title":"2 Hand Gold Gatling","offer_id":43813265342604,"sku":"AB-3","price":9.99,"currency_code":"USD","in_stock":false},{"title":"Red\/Gold Chainsaw","offer_id":43813265375372,"sku":"AH-4","price":9.99,"currency_code":"USD","in_stock":true},{"title":"Gold Swords","offer_id":43813265408140,"sku":"KG-5","price":9.99,"currency_code":"USD","in_stock":true},{"title":"Red Gold Swords","offer_id":43813265440908,"sku":"AH-6","price":9.99,"currency_code":"USD","in_stock":true},{"title":"2HandGold-RedBarrel","offer_id":43813265473676,"sku":"LS-7","price":9.99,"currency_code":"USD","in_stock":false},{"title":"SOLIDRed\/Gold Minix2","offer_id":43813265506444,"sku":"LS-8","price":9.99,"currency_code":"USD","in_stock":true},{"title":"2H Gold Black Barrel","offer_id":43813265539212,"sku":"JM-9","price":9.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/ebd57e09-il_fullxfull.6185381315_hw5n.jpg?v=1738686884"},{"product_id":"grizzled-veteran-head-1-12-scale","title":"Grizzled Veteran head - 1:12 scale","description":"\u003cp\u003e\u003cstrong\u003eGrizzled Veteran head - 1:12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813265735820,"sku":"AQ","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/b25a041a-il_fullxfull.4063867724_cqru.jpg?v=1738686886"},{"product_id":"pair-of-sai-2-0-1-12-scale","title":"Pair of sai 2.0 -  1\/12 scale","description":"\u003cp\u003e\u003cstrong\u003ePair of sai 2.0 -  1\/12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813265768588,"sku":"AG","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/5e6a7dc6-il_fullxfull.6618724493_gtkr.jpg?v=1738686885"},{"product_id":"ar-15-pdw-сollimator-foregrip-1-12-scale","title":"AR-15-PDW Сollimator Foregrip - 1\/12 scale","description":"\u003cp\u003e\u003cstrong\u003eAR-15-PDW Сollimator Foregrip - 1\/12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813265834124,"sku":"I","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/f1303105-il_fullxfull.6563735314_sza9.jpg?v=1738686888"},{"product_id":"set-of-3-bright-green-bat-symbol-replacement-chest-plate-1-12-scale-classified-bat-compatible","title":"Set of 3 Bright Green Classified BAT symbol replacement chest plateS - 1\/12 scale","description":"\u003cp\u003e\u003cstrong\u003eSet of 3 Bright Green Classified BAT symbol replacement chest plateS - 1\/12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813266391180,"sku":null,"price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/6922f9f9-il_fullxfull.4889385878_c440.jpg?v=1738686890"},{"product_id":"cyber-long-sword-1-12-scale","title":"Cyber long sword -  1\/12 scale","description":"\u003cp\u003eCyber long sword -  1\/12 scale\u003c\/p\u003e\n\u003cp\u003eDESIGNED BY 3DDIOS\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"1:10","offer_id":45599137104012,"sku":"T","price":4.99,"currency_code":"USD","in_stock":true},{"title":"1:12","offer_id":45599137136780,"sku":"Q","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/bc7a36ea-il_fullxfull.6225946426_1u8q.jpg?v=1738686890"},{"product_id":"tec-9-smg-submachine-gun-3-styles-1-12-scale","title":"Tec-9 SMG submachine gun 3 styles - 1\/12 scale","description":"\u003cp\u003e\u003cstrong\u003eTec-9 SMG submachine gun 3 styles - 1\/12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Tec-9 Sup","offer_id":43813267079308,"sku":"AE-1","price":7.99,"currency_code":"USD","in_stock":true},{"title":"Brace","offer_id":43813267112076,"sku":"AE-2","price":7.99,"currency_code":"USD","in_stock":false},{"title":"Tec-9","offer_id":43813267177612,"sku":"AE-3","price":7.99,"currency_code":"USD","in_stock":true},{"title":"All 3 Tec-9 options","offer_id":43813267275916,"sku":"AE-4","price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/39df91ea-il_fullxfull.3889861335_4vzv.jpg?v=1738686885"},{"product_id":"star-scream-head-chest-plate-blaster-kit-1-12-scale-classified-compatible","title":"Star scream head\/chest plate\/blaster kit - 1\/12 scale","description":"\u003cp\u003e\u003cstrong\u003eStar scream head\/chest plate\/blaster kit - 1\/12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813267964044,"sku":"KL","price":14.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/e7f15cbe-il_fullxfull.6175641430_1llg.jpg?v=1738686886"},{"product_id":"killer-croc-master-head-6-gi-joe-7-legions","title":"Killer Croc Master Head - 1:12 Scale","description":"\u003cp\u003e\u003cstrong\u003eKiller Croc Master Head - 6\" GI Joe 7\" Legions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813267996812,"sku":"CR","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/ae0ca0ec-il_fullxfull.5383830314_99t7.jpg?v=1747966738"},{"product_id":"pair-of-sai-1-12-scale","title":"Pair of sai -  1\/12 scale","description":"\u003cp\u003e\u003cstrong\u003ePair of sai -  1\/12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813268160652,"sku":"F","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/e5713eb2-il_fullxfull.6192412114_rn0u.jpg?v=1738686888"},{"product_id":"gunwitch-the-gunfighting-golem-1-12-scale-head-classified-compatible-unpainted","title":"Gunwitch the Gunfighting Golem - 1\/12 scale","description":"\u003cp\u003e\u003cstrong\u003eGunwitch the Gunfighting Golem - 1\/12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813268193420,"sku":"LM","price":7.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/a3f5d947-il_fullxfull.4411721267_lcj6.jpg?v=1738686887"},{"product_id":"water-tribe-boomerang-1-12-scale","title":"Water Tribe Boomerang - 1\/12 scale","description":"\u003cp\u003e\u003cstrong\u003eWater Tribe Boomerang - 1\/12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813268258956,"sku":"G","price":4.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/a688ab58-il_fullxfull.4889323436_fvcn.jpg?v=1738686885"},{"product_id":"future-punisher-head-1-12-scale","title":"Future punisher - 1\/12 scale","description":"\u003cp\u003eFuture punisher - 1\/12 scale\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813268422796,"sku":"BC","price":7.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/2bf80b8b-il_fullxfull.6120447016_36ji.jpg?v=1738686885"},{"product_id":"death-viper-head-1-12-scale-unpainted","title":"Death viper head - 1\/12 scale unpainted","description":"\u003cp\u003e\u003cb\u003eDeath viper head - 1\/12 scale unpainted\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDesigned by JCirion3d\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813268455564,"sku":"CR","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/316bca73-il_fullxfull.6151882736_ic8z.jpg?v=1738686885"},{"product_id":"head-inspired-by-overkill-bright-green-head-1-12-scale-classified-compatible-cc","title":"Overkill bright green head - 1\/12 scale","description":"\u003cp\u003e\u003cstrong\u003eOverkill bright green head - 1\/12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813268521100,"sku":"CC","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/3277d95f-il_fullxfull.6120446500_ovjm.jpg?v=1738686885"},{"product_id":"tactical-shotgun-1-1-12-scale","title":"Tactical shotgun 1 - 1\/12 scale","description":"\u003cp\u003e\u003cstrong\u003eTactical shotgun 1 - 1\/12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813268750476,"sku":"T","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/172eb581-il_fullxfull.6133553500_b2zw.jpg?v=1738686886"},{"product_id":"codename-raven-head-1-12-scale","title":"Codename: Raven - 1\/12 scale","description":"\u003cp\u003e\u003cstrong\u003eCodename: Raven - 1\/12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813268914316,"sku":"CA","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/38efa49e-il_fullxfull.6196623754_1po5.jpg?v=1738686886"},{"product_id":"supernatural-sam-winchester-head-1-12-scale","title":"Supernatural Sam Winchester head - 1\/12 scale","description":"\u003cp\u003e\u003cstrong\u003eSupernatural Sam Winchester head - 1\/12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813269241996,"sku":"F","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/c5e023f6-il_fullxfull.6273420091_ih09.jpg?v=1738686885"},{"product_id":"gas-mask-head-1-12-scale-classified-compatible-bd","title":"Gas Mask Head - 1\/12 scale","description":"\u003cp\u003eGas Mask Head - 1\/12 scale\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813269340300,"sku":"BD","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/cfe980a3-il_fullxfull.4345258890_3dfj.jpg?v=1738686885"},{"product_id":"obi-wan-jedi-master-inspired-head-1-12-scale","title":"Obi wan Jedi Master - 1\/12 scale","description":"\u003cp\u003e\u003cstrong\u003eObi wan Jedi Master - 1\/12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813269405836,"sku":"BZ","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/8654d9f2-il_fullxfull.4889320692_rvqk.jpg?v=1738686885"},{"product_id":"plain-shoulder-harness-1-12-scale","title":"Plain shoulder harness -  1\/12 scale","description":"\u003cp\u003e\u003cb\u003ePlain shoulder harness -  1\/12 scale\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDesigned by FigureGear\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813269438604,"sku":"KS","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/556ba57d-il_fullxfull.6162575424_etcs.jpg?v=1738686884"},{"product_id":"long-sword-1-12-scale","title":"Long sword - 1\/12 scale","description":"\u003cp\u003e\u003cstrong\u003eLong sword - 1\/12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813269471372,"sku":"P","price":6.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/396f0b00-il_fullxfull.6199109286_o0lg.jpg?v=1738686885"},{"product_id":"snake-eyes-unmasked-head-1-12-scale-classified","title":"Snake Eyes Unmasked head - 1\/12 scale","description":"\u003cp\u003e\u003cstrong\u003eSnake Eyes Unmasked head - 1\/12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813269504140,"sku":"CU","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/68f815a5-il_fullxfull.5495106160_tr5k.jpg?v=1738686884"},{"product_id":"supernatural-demon-blade-1-12-scale","title":"Supernatural Demon blade - 1\/12 scale","description":"\u003cp\u003e\u003cstrong\u003eSupernatural Demon blade - 1\/12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813269569676,"sku":"X","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/b925aecf-il_fullxfull.6222681352_79qf.jpg?v=1738686884"},{"product_id":"bat-bone-scythe-1-12-scale-classified-compatible-ax","title":"BAT Bone Scythe - 1\/12 scale BAT Attachment","description":"\u003cp\u003e\u003cstrong\u003eBAT Bone Scythe - 1\/12 scale BAT Attachment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813269635212,"sku":"AX","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/27189572-il_fullxfull.4783334916_s5bw.jpg?v=1738686887"},{"product_id":"baseball-hat-plain-or-communication-headset-1-12-scale","title":"Baseball Hat - Plain - 1\/12 Scale","description":"\u003cp\u003e\u003cb\u003eDesigned by Metalbeef\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813269733516,"sku":"G-1","price":6.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/bc78f281-il_fullxfull.6363723066_7ffb.jpg?v=1738686884"},{"product_id":"titan-commander-head-1-12-scale","title":"Titan Commander head - 1\/12 scale","description":"\u003cp\u003e\u003cstrong\u003eTitan Commander head - 1\/12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813269799052,"sku":"BZ","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/7afa182e-il_fullxfull.4889418016_40fg.jpg?v=1738686884"},{"product_id":"starscream-head-1-12-scale","title":"Starscream Head - 1\/12 scale","description":"\u003cp\u003e\u003cstrong\u003eStarscream Head - 1\/12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813269864588,"sku":"AA","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/37c92a01-il_fullxfull.4971373578_2trk.jpg?v=1738686884"},{"product_id":"scar-h-foregrip-сollimator-1-12-scale","title":"SCAR-H Foregrip Сollimator - 1\/12 scale","description":"\u003cp\u003e\u003cstrong\u003eSCAR-H Foregrip Сollimator - 1\/12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813269897356,"sku":"I","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/190d52b5-il_fullxfull.6563839450_gkyl.jpg?v=1738686884"},{"product_id":"supernatural-angel-blade-1-12-scale","title":"Supernatural Angel blade - 1\/12 scale","description":"\u003cp\u003e\u003cstrong\u003eSupernatural Angel blade - 1\/12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813270225036,"sku":"AZ","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/fbac382d-il_fullxfull.6190865588_t0x1.jpg?v=1738686884"},{"product_id":"ninja-bandoliers-1-12-scale-classified-compatible","title":"Ninja Bandoliers - 1\/12 scale","description":"\u003cp\u003e\u003cstrong\u003eNinja Bandoliers - 1\/12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813270454412,"sku":"AF","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/4779c39d-il_fullxfull.4944109523_9ft7.jpg?v=1738686885"},{"product_id":"psyche-out-vest-1-12-scale-gi-joe-classified-compatible","title":"Psyche-Out Vest - 1\/12 scale","description":"\u003cp\u003e\u003cstrong\u003ePsyche-Out Vest - 1\/12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813270618252,"sku":"KQ","price":12.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/44f0ed95-il_fullxfull.5748477334_hzc7.jpg?v=1738686884"},{"product_id":"1-12-scale-head-inspired-by-moon-knight","title":"Moon Knight - 1:12 scale","description":"\u003cp\u003e\u003cstrong\u003eMoon Knight - 1:12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesigned by Orobus22\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813270749324,"sku":"W","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/dea2bcee-il_fullxfull.6162991032_jhc5.jpg?v=1738686885"},{"product_id":"warhammer-1-12-scale","title":"Warhammer - 1\/12 scale","description":"\u003cp\u003e\u003cstrong\u003eWarhammer - 1\/12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813270782092,"sku":"L","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/f6ab0b39-il_fullxfull.4941191879_o6re.jpg?v=1738686886"},{"product_id":"double-barreled-shotgun-with-stock-1-12-scale","title":"Double barreled shotgun with stock - 1\/12 scale","description":"\u003cp\u003eDouble barreled shotgun with stock - 1\/12 scale\u003c\/p\u003e\n\u003cp\u003eDESIGNED BY 3DDIOS\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813270945932,"sku":"AU","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/06e7933d-il_fullxfull.6204530277_mltb.jpg?v=1738686884"},{"product_id":"1-12-scale-head-andrew-parker","title":"Andrew Parker Garfield - 1\/12 scale","description":"\u003cp\u003eAndrew Parker Garfield - 1\/12 scale \u003c\/p\u003e\n\u003cp\u003eDesigned by Orobus22\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813271077004,"sku":"BF","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/cf90e72f-il_fullxfull.4392664669_gkc2.jpg?v=1738686885"},{"product_id":"strato-viper-female-head-1-12-scale-classified-compatible-unpainted-cy","title":"Strato-Viper Female head - 1\/12 scale","description":"\u003cp\u003e\u003cstrong\u003eStrato-Viper Female head - 1\/12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813271208076,"sku":"CY","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/2cc710d1-il_fullxfull.5643166524_9nop.jpg?v=1738686887"},{"product_id":"the-crimson-guard-freds-3-different-variations-or-1-random-head-1-12-scale","title":"The Crimson Guard Fred's - 1 random head, 3 different variations - 1\/12 scale","description":"\u003cp\u003e\u003cstrong\u003eThe Crimson Guard Fred's - 1 random head, 3 different variations   - 1\/12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813271404684,"sku":"CG","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/8c179230-il_fullxfull.5257202620_rhz3.jpg?v=1738686887"},{"product_id":"major-bludd-bluddwolf-head-1-12-scale-unpainted","title":"Major Bludd Bluddwolf head - 1\/12 scale","description":"\u003cp\u003e\u003cstrong\u003eMajor Bludd Bluddwolf head - 1\/12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Bluddwold 6\u0026quot;","offer_id":43813271535756,"sku":"CK","price":7.99,"currency_code":"USD","in_stock":true},{"title":"Bluddwolf 7\u0026quot;","offer_id":43813271568524,"sku":"JD","price":7.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/a613b3e9-il_fullxfull.6187456397_jewp.jpg?v=1738686888"},{"product_id":"large-gi-joe-iron-grenadier-darklon-inspired-head-gun-kit-1-12-scale-classified-compatible","title":"LARGE Darklon inspired head\/gun kit","description":"\u003cp\u003e\u003cb\u003e3d printed Head and Gun - Darklon with weapon\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eHead Designed by JCirion3d\u003cbr\u003eGun designed by OnePerCase\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSized for the GungHo\/Roadblock body\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813271601292,"sku":"KH","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/7b8a2d95-il_fullxfull.6260684834_rpvd.jpg?v=1738686886"},{"product_id":"transporter-head-1-12-scale-gi-joe-classified-compatible-ce","title":"Transporter head - 1\/12 scale","description":"\u003cp\u003e\u003cstrong\u003eTransporter head - 1\/12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813271634060,"sku":"CE","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/c5724335-il_fullxfull.3988493784_1bzf.jpg?v=1738686887"},{"product_id":"gun-metal-bat-claw-attachment-1-12-scale-gi-joe-classified","title":"Gun Metal BAT Claw Attachment Open - 1\/12 scale","description":"\u003cp\u003e\u003cstrong\u003eGun Metal BAT Claw Attachment Open - 1\/12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813271666828,"sku":"AM","price":9.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/d711738c-il_fullxfull.5257282290_7scj.jpg?v=1738686885"},{"product_id":"snake-eyes-commando-head-classified-compatible-1-12-scale","title":"Snake eyes Commando head - 1:12 scale","description":"\u003cp\u003e\u003cstrong\u003eSnake eyes Commando head - 1:12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813271732364,"sku":"AM","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/bcbb24e7-il_fullxfull.6196181528_6b2g.jpg?v=1738686885"},{"product_id":"clear-bright-green-head-inspired-by-techno-viper-1-12-scale","title":"Clear Bright Green Techno-Viper - 1:12 scale","description":"\u003cp\u003e\u003cstrong\u003eClear Bright Green Techno-Viper - 1:12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813271765132,"sku":"BV","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/6a410e02-il_fullxfull.4666995915_cch6.jpg?v=1738686886"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/collections\/ChatGPT_Image_Jun_3_2025_08_07_48_AM.png?v=1748963371","url":"https:\/\/www.onepercase.com\/collections\/1-12-scale.oembed?page=37","provider":"J's Armory","version":"1.0","type":"link"}