{"title":"1:12 Scale Heads","description":"","products":[{"product_id":"1-12-scale-head-female-ninja-head-inspired-by-jinx-unpainted","title":"Female Ninja Head - 1\/12 scale","description":"\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e1\/12 scale head Female Ninja Head\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by JCirion3d\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchased pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43799079682188,"sku":"BH","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/il_1000x794.4364341906_fjld.jpg?v=1738257770"},{"product_id":"voltar-no-helmet-inspired-head-6-and-7-scale-legions","title":"Voltar (No helmet) inspired head - 1\/12 scale","description":"\u003cp\u003e\u003cstrong\u003eVoltar (No helmet) inspired head - 1\/12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43799079714956,"sku":"G","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/VoltarHead.png?v=1772913227"},{"product_id":"grizzled-veteran-head-1-12-scale","title":"Grizzled Veteran head - 1:12 scale","description":"\u003cp\u003e\u003cstrong\u003eGrizzled Veteran head - 1:12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813265735820,"sku":"AQ","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/b25a041a-il_fullxfull.4063867724_cqru.jpg?v=1738686886"},{"product_id":"killer-croc-master-head-6-gi-joe-7-legions","title":"Killer Croc Master Head - 1:12 Scale","description":"\u003cp\u003e\u003cstrong\u003eKiller Croc Master Head - 6\" GI Joe 7\" Legions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813267996812,"sku":"CR","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/ae0ca0ec-il_fullxfull.5383830314_99t7.jpg?v=1747966738"},{"product_id":"gunwitch-the-gunfighting-golem-1-12-scale-head-classified-compatible-unpainted","title":"Gunwitch the Gunfighting Golem - 1\/12 scale","description":"\u003cp\u003e\u003cstrong\u003eGunwitch the Gunfighting Golem - 1\/12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813268193420,"sku":"LM","price":7.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/a3f5d947-il_fullxfull.4411721267_lcj6.jpg?v=1738686887"},{"product_id":"future-punisher-head-1-12-scale","title":"Future punisher - 1\/12 scale","description":"\u003cp\u003eFuture punisher - 1\/12 scale\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813268422796,"sku":"BC","price":7.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/2bf80b8b-il_fullxfull.6120447016_36ji.jpg?v=1738686885"},{"product_id":"death-viper-head-1-12-scale-unpainted","title":"Death viper head - 1\/12 scale unpainted","description":"\u003cp\u003e\u003cb\u003eDeath viper head - 1\/12 scale unpainted\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDesigned by JCirion3d\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813268455564,"sku":"CR","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/316bca73-il_fullxfull.6151882736_ic8z.jpg?v=1738686885"},{"product_id":"head-inspired-by-overkill-bright-green-head-1-12-scale-classified-compatible-cc","title":"Overkill bright green head - 1\/12 scale","description":"\u003cp\u003e\u003cstrong\u003eOverkill bright green head - 1\/12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813268521100,"sku":"CC","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/3277d95f-il_fullxfull.6120446500_ovjm.jpg?v=1738686885"},{"product_id":"codename-raven-head-1-12-scale","title":"Codename: Raven - 1\/12 scale","description":"\u003cp\u003e\u003cstrong\u003eCodename: Raven - 1\/12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813268914316,"sku":"CA","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/38efa49e-il_fullxfull.6196623754_1po5.jpg?v=1738686886"},{"product_id":"supernatural-sam-winchester-head-1-12-scale","title":"Supernatural Sam Winchester head - 1\/12 scale","description":"\u003cp\u003e\u003cstrong\u003eSupernatural Sam Winchester head - 1\/12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813269241996,"sku":"F","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/c5e023f6-il_fullxfull.6273420091_ih09.jpg?v=1738686885"},{"product_id":"gas-mask-head-1-12-scale-classified-compatible-bd","title":"Gas Mask Head - 1\/12 scale","description":"\u003cp\u003eGas Mask Head - 1\/12 scale\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813269340300,"sku":"BD","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/cfe980a3-il_fullxfull.4345258890_3dfj.jpg?v=1738686885"},{"product_id":"obi-wan-jedi-master-inspired-head-1-12-scale","title":"Obi wan Jedi Master - 1\/12 scale","description":"\u003cp\u003e\u003cstrong\u003eObi wan Jedi Master - 1\/12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813269405836,"sku":"BZ","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/8654d9f2-il_fullxfull.4889320692_rvqk.jpg?v=1738686885"},{"product_id":"snake-eyes-unmasked-head-1-12-scale-classified","title":"Snake Eyes Unmasked head - 1\/12 scale","description":"\u003cp\u003e\u003cstrong\u003eSnake Eyes Unmasked head - 1\/12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813269504140,"sku":"CU","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/68f815a5-il_fullxfull.5495106160_tr5k.jpg?v=1738686884"},{"product_id":"titan-commander-head-1-12-scale","title":"Titan Commander head - 1\/12 scale","description":"\u003cp\u003e\u003cstrong\u003eTitan Commander head - 1\/12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813269799052,"sku":"BZ","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/7afa182e-il_fullxfull.4889418016_40fg.jpg?v=1738686884"},{"product_id":"starscream-head-1-12-scale","title":"Starscream Head - 1\/12 scale","description":"\u003cp\u003e\u003cstrong\u003eStarscream Head - 1\/12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813269864588,"sku":"AA","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/37c92a01-il_fullxfull.4971373578_2trk.jpg?v=1738686884"},{"product_id":"1-12-scale-head-inspired-by-moon-knight","title":"Moon Knight - 1:12 scale","description":"\u003cp\u003e\u003cstrong\u003eMoon Knight - 1:12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesigned by Orobus22\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813270749324,"sku":"W","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/dea2bcee-il_fullxfull.6162991032_jhc5.jpg?v=1738686885"},{"product_id":"1-12-scale-head-andrew-parker","title":"Andrew Parker Garfield - 1\/12 scale","description":"\u003cp\u003eAndrew Parker Garfield - 1\/12 scale \u003c\/p\u003e\n\u003cp\u003eDesigned by Orobus22\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813271077004,"sku":"BF","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/cf90e72f-il_fullxfull.4392664669_gkc2.jpg?v=1738686885"},{"product_id":"strato-viper-female-head-1-12-scale-classified-compatible-unpainted-cy","title":"Strato-Viper Female head - 1\/12 scale","description":"\u003cp\u003e\u003cstrong\u003eStrato-Viper Female head - 1\/12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813271208076,"sku":"CY","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/2cc710d1-il_fullxfull.5643166524_9nop.jpg?v=1738686887"},{"product_id":"the-crimson-guard-freds-3-different-variations-or-1-random-head-1-12-scale","title":"The Crimson Guard Fred's - 1 random head, 3 different variations - 1\/12 scale","description":"\u003cp\u003e\u003cstrong\u003eThe Crimson Guard Fred's - 1 random head, 3 different variations   - 1\/12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813271404684,"sku":"CG","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/8c179230-il_fullxfull.5257202620_rhz3.jpg?v=1738686887"},{"product_id":"major-bludd-bluddwolf-head-1-12-scale-unpainted","title":"Major Bludd Bluddwolf head - 1\/12 scale","description":"\u003cp\u003e\u003cstrong\u003eMajor Bludd Bluddwolf head - 1\/12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Bluddwold 6\u0026quot;","offer_id":43813271535756,"sku":"CK","price":7.99,"currency_code":"USD","in_stock":true},{"title":"Bluddwolf 7\u0026quot;","offer_id":43813271568524,"sku":"JD","price":7.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/a613b3e9-il_fullxfull.6187456397_jewp.jpg?v=1738686888"},{"product_id":"large-gi-joe-iron-grenadier-darklon-inspired-head-gun-kit-1-12-scale-classified-compatible","title":"LARGE Darklon inspired head\/gun kit","description":"\u003cp\u003e\u003cb\u003e3d printed Head and Gun - Darklon with weapon\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eHead Designed by JCirion3d\u003cbr\u003eGun designed by OnePerCase\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSized for the GungHo\/Roadblock body\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813271601292,"sku":"KH","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/7b8a2d95-il_fullxfull.6260684834_rpvd.jpg?v=1738686886"},{"product_id":"transporter-head-1-12-scale-gi-joe-classified-compatible-ce","title":"Transporter head - 1\/12 scale","description":"\u003cp\u003e\u003cstrong\u003eTransporter head - 1\/12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813271634060,"sku":"CE","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/c5724335-il_fullxfull.3988493784_1bzf.jpg?v=1738686887"},{"product_id":"snake-eyes-commando-head-classified-compatible-1-12-scale","title":"Snake eyes Commando head - 1:12 scale","description":"\u003cp\u003e\u003cstrong\u003eSnake eyes Commando head - 1:12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813271732364,"sku":"AM","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/bcbb24e7-il_fullxfull.6196181528_6b2g.jpg?v=1738686885"},{"product_id":"clear-bright-green-head-inspired-by-techno-viper-1-12-scale","title":"Clear Bright Green Techno-Viper - 1:12 scale","description":"\u003cp\u003e\u003cstrong\u003eClear Bright Green Techno-Viper - 1:12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813271765132,"sku":"BV","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/6a410e02-il_fullxfull.4666995915_cch6.jpg?v=1738686886"},{"product_id":"retired-assassin-head-1-12-scale-classified-compatible-h","title":"Retired Assassin Head - 1\/12 scale","description":"\u003cp\u003e\u003cstrong\u003eRetired Assassin Head - 1\/12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813273043084,"sku":"H","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/9c156ebc-il_fullxfull.4871712400_km9g.jpg?v=1738686887"},{"product_id":"glow-in-dark-classic-snake-eyes-ninja-commando-head-1-12-scale","title":"GLOW in DARK Classic Snake Eyes Ninja Commando - 1:12 scale","description":"\u003cp\u003e\u003cstrong\u003eGLOW in DARK Classic Snake Eyes Ninja Commando - 1:12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813273174156,"sku":"A","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/3585fd5c-il_fullxfull.3732243723_83c9.jpg?v=1738686886"},{"product_id":"bright-green-darklon-small-inspired-head-1-12-scale","title":"Bright Green Darklon (Small) - 1\/12 scale","description":"\u003cp\u003e\u003cstrong\u003eBright Green Darklon (Small) - 1\/12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesigned by JCirion3d\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFitted for GI Joe Classified Stalker\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813273370764,"sku":"BS","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/61b6c068-il_fullxfull.4667002801_dadd.jpg?v=1738686886"},{"product_id":"android-commander-classic-head-1-12-scale-classified-compatible","title":"Overkill BAT Commander Classic - 1:12 scale","description":"\u003cp\u003e\u003cstrong\u003eOverkill BAT Commander Classic - 1:12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesigned by JCirion3d\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813274222732,"sku":"CE","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/43eb99f7-il_fullxfull.5135585781_onf1.jpg?v=1738686888"},{"product_id":"oscar-isaacs-inspired-head-classified-compatible-1-12-scale-c","title":"Oscar Isaacs inspired head  1:12 scale","description":"\u003cp\u003e\u003cstrong\u003eOscar Isaacs inspired head  1:12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813274452108,"sku":"C","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/f1063425-il_fullxfull.4063872240_9sfh.jpg?v=1738686885"},{"product_id":"supernatural-dean-winchester-head-1-12-scale","title":"Supernatural Dean Winchester head - 1\/12 scale","description":"\u003cp\u003e\u003cstrong\u003eSupernatural Dean Winchester head - 1\/12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813274943628,"sku":"F","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/f6a08bfc-il_fullxfull.6225370382_mc7b.jpg?v=1738686885"},{"product_id":"crimson-guard-inspired-fred-head-1-12-scale-classified-compatible-unpainted-ch","title":"Fred, Crimson guard - 1\/12 scale","description":"\u003cp\u003e\u003cb\u003e Fred, Crimson guard - 1\/12 scale\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDesigned by JCirion3d\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813275304076,"sku":"CH","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/7ff8e0a2-il_fullxfull.6169413954_bznh.jpg?v=1738686884"},{"product_id":"black-mask-skull-head-1-12-scale","title":"Black Mask skull head - 1\/12 scale","description":"\u003cp\u003e\u003cb\u003eDesigned by 3DDios\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813275631756,"sku":"I","price":7.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/1bb44540-il_fullxfull.6171983426_99qp.jpg?v=1738686884"},{"product_id":"sith-style-android-head-classified-compatible-1-12-scale","title":"Sith Style Android head  - 1:12 scale","description":"\u003cp\u003e\u003cstrong\u003eSith Style Android head  - 1:12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813276188812,"sku":"AL","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/122f12fa-il_fullxfull.4111458703_b3wc.jpg?v=1738686885"},{"product_id":"leeloo-5th-element-inspired-head-1-12-scale","title":"Leeloo 5th element inspired head - 1\/12 scale","description":"\u003cp\u003e\u003cstrong\u003eLeeloo 5th element inspired head - 1\/12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813276287116,"sku":"BK","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/70d6591f-il_fullxfull.6229520547_6j6f.jpg?v=1738686889"},{"product_id":"skull-head-1-12-scale","title":"Skull head - 1:12 scale","description":"\u003cp\u003e\u003cstrong\u003eSkull head - 1:12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813276450956,"sku":"AN","price":7.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/4d4b55e3-il_fullxfull.6275372895_imp0.jpg?v=1738686886"},{"product_id":"scarecrow-head-1-12-scale","title":"Scarecrow head - 1\/12 scale","description":"\u003cp\u003e\u003cstrong\u003eScarecrow head - 1\/12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813276647564,"sku":"BV","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/4df8cc3b-il_fullxfull.4618765080_eetl.jpg?v=1738686887"},{"product_id":"speaker-inspired-1-12-scale-head","title":"Speaker - 1\/12 scale","description":"\u003cp\u003e\u003cstrong\u003eSpeaker - 1\/12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813277040780,"sku":"AF","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/bd0caa85-il_fullxfull.6188687880_dx3x.jpg?v=1738686885"},{"product_id":"1-12-scale-hydro-viper-head-inspired-by-gi-joe","title":"Hydro Viper - 1:12 scale","description":"\u003cp\u003e\u003cstrong\u003eHydro Viper - 1:12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesigned by JCirion3d\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813277106316,"sku":"AL","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/c1383556-il_fullxfull.6416372883_3gps.jpg?v=1738686886"},{"product_id":"avac-inspired-male-head-1-12-scale","title":"GI Joe AVAC inspired Male head - 1:12 Scale","description":"\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eAVAC inspired Male head - 1:12 Scale\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDesigned by JCirion3d\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis item is a 3d printed item for adults.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThis is not intended for children.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking. Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThank you!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813277859980,"sku":"CW","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/177c759b-il_fullxfull.5691243949_nnri.jpg?v=1738686886"},{"product_id":"motor-viper-helmet-1-12-scale-gi-joe-classified-compatible","title":"Motor viper helmet - 1\/12 scale","description":"\u003cp\u003e\u003cstrong\u003eMotor viper helmet - 1\/12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813277925516,"sku":"KA","price":7.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/7c289857-il_fullxfull.6267642641_cqu2.jpg?v=1738686890"},{"product_id":"a-l-f-alf-inspired-1-12-scale-head-classified-compatible-ah","title":"A.L.F. Alf inspired - 1\/12 scale","description":"\u003cp\u003e\u003cstrong\u003eA.L.F. Alf inspired - 1\/12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesigned by 3DDios\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813277958284,"sku":"AH","price":7.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/a36d24e6-il_fullxfull.3862138768_bwzh.jpg?v=1738686885"},{"product_id":"one-eyed-assassin-inspired-by-deathstroke-1-12-scale-head-classified-compatible-v","title":"One-eyed Assassin inspired by Deathstroke - 1\/12 scale","description":"\u003cp\u003e\u003cstrong\u003eOne-eyed Assassin inspired by Deathstroke - 1\/12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813279072396,"sku":"V","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/f2b65080-il_fullxfull.6218743987_6hz8.jpg?v=1738686885"},{"product_id":"scorpion-king-the-rock-inspired-head-compatible-1-12-scale","title":"Scorpion King (The Rock) inspired - 1:12 scale","description":"\u003cp\u003e\u003cstrong\u003eScorpion King (The Rock) inspired - 1:12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813279170700,"sku":"AP","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/8e168449-il_fullxfull.4111479917_ast7.jpg?v=1738686884"},{"product_id":"billy-cobra-commanders-son-inspired-1-12-scale-right-eye-patch-head","title":"Billy (Cobra Commander's Son) - 1\/12 scale right eye patch","description":"\u003cp\u003e\u003cstrong\u003eBilly (Cobra Commander's Son) - 1\/12 scale right eye patch\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesigned by 3ddios\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813279334540,"sku":"I","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/cd07dcac-il_fullxfull.6163490122_9vxx.jpg?v=1738686885"},{"product_id":"snake-plissken-inspired-1-12-scale-left-eye-patch-head-gi-joe-classified-compatible","title":"Snake plissken inspired - 1\/12 scale (left eye patch)","description":"\u003cp\u003e\u003cstrong\u003eSnake plissken inspired - 1\/12 scale (left eye patch)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813279400076,"sku":"C","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/fb83852b-il_fullxfull.6221524336_2gni.jpg?v=1738686884"},{"product_id":"resolute-snake-eyes-head-1-12-scale","title":"Resolute Snake Eyes head - 1\/12 scale","description":"\u003cp\u003e\u003cstrong\u003eResolute Snake Eyes head - 1\/12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813279498380,"sku":"CB","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/fe891ee0-il_fullxfull.6633842667_ng3f.jpg?v=1738686884"},{"product_id":"kraven-inspired-head-1-12-scale","title":"Kraven head - 1\/12 scale","description":"\u003cp\u003e\u003cstrong\u003eKraven head - 1\/12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813280219276,"sku":"CS","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/88a58901-il_fullxfull.6214166265_gs12.jpg?v=1738686885"},{"product_id":"classic-snake-eyes-inspired-ninja-commando-inspired-head-classified-compatible-1-12-scale-a","title":"Classic Snake Eyes Ninja Commando - 1:12 scale","description":"\u003cp\u003e\u003cstrong\u003eClassic Snake Eyes Ninja Commando - 1:12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813280317580,"sku":"A","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/eb33fb66-il_fullxfull.6205841395_46pc.jpg?v=1738686884"},{"product_id":"cobra-commander-head-flowing-out-1-12-scale","title":"Cobra commander head flowing out - 1\/12 scale","description":"\u003cp\u003e\u003cstrong\u003eCobra commander head flowing out - 1\/12 scale \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813280350348,"sku":"X","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/b3ac17e7-il_fullxfull.6224499462_9hx3.jpg?v=1738686887"},{"product_id":"clear-bright-green-android-v2-head-1-12-scale","title":"Clear Bright Green Android v2 - 1:12 scale","description":"\u003cp\u003e\u003cstrong\u003eClear Bright Green Android v2 - 1:12 scale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNO FIGURES ARE INCLUDED. ONLY THE LISTED ITEMS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDisclaimers and Instructions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis item is a 3d printed item for adults. This is not intended for children.\u003c\/p\u003e\n\u003cp\u003eUnpainted 3d items are very susceptible to UV light until they are coated with either a clear coat or paint. Please remember to protect it from sunlight until finished.\u003c\/p\u003e\n\u003cp\u003eAll items are made and\/or painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed.\u003c\/p\u003e\n\u003cp\u003eIf you purchase pre-painted items, the paint may cause the item to be more rigid. You may need to heat items and shape them to your liking (Hot water may be the safest method). Most vests will need this to fit properly and fasten onto a figure. Once in place, I recommend gluing the connectors.\u003c\/p\u003e\n\u003cp\u003eAll heads will need to be fit to your chosen body. Dremeling, putty, etc. will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole.\u003c\/p\u003e\n\u003cp\u003eThank you so much for considering a purchase!\u003c\/p\u003e\n\u003cp\u003eAll hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!\u003c\/p\u003e\n\u003cp\u003e***PLEASE NOTE*** Action figure scales vary widely. We try to hit the GI Joe Modern Era 1\/18, Classified 1\/12 and the McF\/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThank you!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"J's Armory","offers":[{"title":"Default Title","offer_id":43813280514188,"sku":"BQ","price":7.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/files\/592dc6a2-il_fullxfull.4618740606_g3b0.jpg?v=1738686885"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/9356\/4300\/collections\/48180680-il_fullxfull.6266645809_5ai6.jpg?v=1748969909","url":"https:\/\/www.onepercase.com\/collections\/1-12-scale-heads.oembed?page=26","provider":"J's Armory","version":"1.0","type":"link"}